Welcome
Product Description
BEVINSEE H4 9003 HB2 LED Headlight Bulbs to Replace Old Halogen Bulbs
FeaturesEach Bulb have 2 sides of 6 PCS SEOUL-CSP LED Chips
External Drive and FAN ,ALL-IN-ONE Technology
Integrated EMC Siam Drive to reduce the chance of contact failure
The lamp body is smaller and can be adapted to more models. The fitting rate reaches 99.98%.
Smart Efficient Cooling System, Reduce or eliminate the noise caused by fan rotation, make driving more quiet, 180% increase in heat dissipation than normal products.
Reduce the electromagnetic interference,Reduce the impact of radio waves. are friendly to the car radio.
High quality Aluminum heat dissipation ensures the secure temperature range.
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip.
Shakeproof ,Dustproof and Long lasting up to 50,000 Hours.
Easy installation, Plug and Play.
Our 60W LED headlights are brighter than the 100W Original lights
Light point is close to the original luminous light spot, closer to the original car light effect type
Item Specifics Lumen: 8000LM/Pair
Wattage: 60W/Pair
Colour Temperature: 6000K White
Operating Temperature: -40℃~80℃
Heat Control: Aircraft Solid Aluminum Body
Electric Current:898mA-2560mA
Normal operating input minimum voltage:12 V
Normal operating input minimum current:2.65 A
Normal operation input maximum voltage:32 V
Normal operation input maximum current: 0.898 A
Fitment: Hi/Low Beam
For Toyota Yaris/Vitz 2000-2018
For Toyota Hiace MK3 MK4 MK5 1989-2016
For Toyota RAV 4 1994-2000
For Toyota Aygo 2005-2013
For Toyota Hilux VI 1999-2002
For Toyota Land Cruiser Prado 2002-2009
For Toyota Verso S 2011-2016
Package including: 2 x LED Headlight Bulbs Imporatnt Notice:
This item wasn't exist self-decoding/self-Canbus【anti-flashing /anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1. the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2. the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3. The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1. Install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need professional installation.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Please mind to check whether the installation space is sufficient.
Some parts need to be removed before install this item to make enough installation space for it.
It may be necessary to replaced the customize dust cover of your headlamp.
Attention:
If you want to use LED bulb on some European vehicles, and the following issue occur on it, those are NOT problems of LED bulb and NOT covered by warranty. It means you may need to buy a set of load resistor:--Hyper Flashing --No Light --Error code shows up Please contact with us if you still have any questions.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
|