Welcome to ExtremeNetwork Store.

For sale is the newest avaialable firmware upgrade for USA Version RNS-510 Navigation system for Volkswagen Vehicles. This is my second listing as the previous one expired. 

This firmware also has DVD-In-Motion unlock enabled as well as Second "Secret Menu" called test mode. This screen is just another menu to check details of your unit, mostly used by developers or service technicians.

Firmware 5382 Was released to the manufacturing on March 2015 and is compatible with SSD ONLY RNS-510 Navi Units, Make sure you unit is compatible with this firmware by checking the part number and/or software version number.
You can do so by pressing "SETUP" button for 15 seconds and selecting Version Information just as shown on the screen below.

If your unit Part number is 3C0035684L/M/N/O/P/Q/R then this firmware is compatible with this firmware upgrade. Some units with part numbers 3C0035684J/K are also compatible but the firmware on that unit must be 4369. IF the firmware on the J/K version unit is 4366 then that unit will not be compatible with this upgrade as it was a crossover unit and does not have SSD Hard drive built in to take advantage of this firmware. 

For all other units I also have firmware upgrades available, below are the part numbers and latest firmware available for those units

3C0035684A/B/C - Latest firmware available is 1040
3C0035684E/F/G/J - Latest firmware available is 4366

If you have one of the older units please make sure you request that firmware. If you don't I will ship firmware 5382 as part of the sale.
All firmwares including the ones for older units have DVD-In-Motion unlock and secret menu enabled.

Keep in mind that Navteq/Here maps are not part of the upgrade. They can be purchased directly from VW Navigation site here 

Here are instructions in loading firmware onto your RNS-510 once you receive it.

1 - Get in the car and turn on the RNS-510 - DO NOT PUT THE KEYS IN THE IGNITION!
2 - Insert the disc into the Nav. 
3 - It will cycle through a few checks and then you will be presented with a screen that tells you about the software and asks you to press OK or Cancel. Press OK. You will then get another screen saying the firmware will be updated are you sure. Select OK again. This process can take around 2-3mins.
4 - The navigation will now update. It takes around 50 mins.


Voila all done.

Pointers/Tips

If you get a message referring to Invalid Clamp state - Press Eject+ Star Button + Guide Button (all 3 buttons together and RNS-510 will reboot into firmware loading mode).


If at any point before update starts you get an error related to "SWL CD detected but invalid Clamp State" please press the following 3 buttons all at once and release them simultaneously.
"Eject+Star Button on top right + Guide Button on bottom right" Once you release those buttons Navigation will go directly into software loading mode and will start loading firmware. 


**After the update is complete on RNS-510, unit will eject the disc and reboot itself.
This update will give you improved Sirius Radio reception, GPS Positioning and guidance as well as much improved performance of the unit. Firmware will also fully Unlock DVD In Motion so you can watch DVD's while the car is moving, and also enable hidden screen menu

Disc will be shipped out withing 24 hours to you.

If you have any questions do not Hesitate to ask me.