The Heaven Fresh NaturoPure HF290 Multi Technology Air Purifier, the very latest in air purifying technology.

Heaven Fresh NaturoPureTM HF290 Air Purifier  helps you breathe with the purest air possible. From dust, pollen, pet dander,  to mould it helps to eliminate virtually all impurities. The carbon pre-filter  removes larger dust particles and light odors to freshen up your room.

HF 290 features easy to use control panel and electronics controls to ensure  simple navigation of settings. Smart sensors monitor the filter condition and  indicate when to clean filters. Enjoy years of worry free operation with our  comprehensive 3 year of warranty.

Features:

  • Air Ionizer :  to energize the air with health beneficial negative ions.
  • HEPA AIR FILTER : Which is 99.97% effective at removing particles such as dust, pet dander & allergens.
  • GERMICIDAL UV LAMP : To destroy micro-organisms like germs, viruses, bacteria & mould.
  • ACTIVATED CARBON FILTER :  For chemicals, gases, VOCs and cigarette smoke.
  • TiO2 Photocatalytic Oxidation Board: Activated by UV light, it relaease free radicals that destroy organic based pollutants. 

OPERATING INSTRUCTIONS:

The air purifier is operated by the manual control located  on the top of the air purifier (as shown in Unit top view)

  1. Plug the air purifier into a 220V AC outlet.
  2. Turn the air purifier on by pressing On/Off  Button.
  3. Upon turning the air purifier on, the power  indicator will be lit, the unit will be in the High fan speed (3), and the  ionizer will start to work.
  4. Pressing Fan Speed Button at this point will set  the air purifier into Medium fan speed (2).
  5. Pressing Fan Speed Button again will set the air  purifier into Low fan speed (1).
  6. Pressing fan speed button once more will set the  air purifier back to High fan speed (3).
  7. To turn the air purifier off, press the On/Off  Button

UV LAMP FUNCTION

The UV-C germicidal lamp can kill harmful airborne bacteria  and virus. This function will work in any mode. Press the UV Button () to start  the UV lamp and stop the UV lamp by pressing the UV Button again.

UV LAMP RESET FUNCTION

If the UV lamp needs to be replaced, the UV icon on the LCD will illuminate and flicker. After replacing the UV lamp, reset the UV lamp by pressing the UV Button for a few seconds, the UV icon will stop flickering and the new UV lamp will start to work. Check from the UV view window, if the UV lamp still lights, it should not be replaced.

HEPA RESET FUNCTION

If the HEPA filter needs to be cleaned, HEPA Reset icon on LCD will illuminate and flicker. After cleaning the HEPA filter, RESET the HEPA filter by using a pin or needle to press the HEPA RESET Button (), then the icon will stop flickering. For instructions on how to clean the HEPA filter see the CLEANING HEPA FILTER on page 7,8.


CLEANING AND MAINTENANCE

CLEANING PRE-FILTER (See Air Cleaning System)

  1.   Turn off unplug the unit.
  2.   Press the lock & Release Button and remove  the Rear cover from the unit.
  3.   Remove the pre-filter from the rear cover. Clean  the pre-filter with the vacuum brush attachment of your vacuum cleaner. This will  remove lint and dirt from the filter. Use a clean, damp, soft cloth to wipe the  pre-filter again.
  4.   After cleaning, reattach the pre-filter to the  rear cover, and install the rear cover back to unit and securely latch in  place.

Box Contains for Hepa & Carbon Filter:

1 x Replacement Ture HEPA & Carbon Filter ( 2 In 1 ) for HF 290.

Box Contains for Carbon Filter:

1 x Replacement Carbon Filter ( 2 In 1 ) for HF 290

Box Contains for UV Lamp:

1 x Replacement UV Lamp for HF 290