PP80B 2Pcs Oscilloscope Scope Clip Probe 1X:10X Oscillograph Rapier 80Mhz
Description
Item model number | PP80 |
Is Discontinued By Manufacturer | No |
Package Dimensions | 7.48 x 4.57 x 0.94 inches; 4.16 Ounces |
- x1:DC-6MHz; x10: DC-60MHz;Compensation scope:20pF-40pF;Cable length120cm
Product Description
1X & 10X Oscilloscope Probe
Frequency Compensation
Before taking any measurements using a probe, first check the compensation of the probe and adjust it to match the channel inputs.Most oscilloscopes have a square wave reference signal available at a terminal on the front panel used to compensate the probe.Connect the probe to the signal source on your oscilloscope.Set the probe to 10x position.Adjust trimmer until seeing flat-top square wave on the display.
Voltage vs Frequency Rating Curve(RMS)
- CAT II
IEC measurement category ll is for measurements performed on circuits directly connected to low voltage installations. Examples are measurements on household appliances, portable tools and similar equipment.
- Equipment fully protected by DOUBLE INSULATTION or REINFORCEDINSULATION.
- Review this user manual carefully to avoid any personal injury or damage to this product and any product connected to it.To avoid potential hazards,use this product only as specified.
- The measurement category of a combination of a PROBE ASSEMBLY and an accessory (an auxiliary to the measurement ) is the lower of the measurement categories of the PROBEASSEMBLY and of the accessory.
- Follow the instructions to use the PROBE ASSEMBLY will impair or ruin its self-owned protection function.
Accessories and Features
Probe is provided with several accessories designed to make probing and measurement simpler.Please take a moment to familiarize yourself with these accessories and their uses.
- 1--Slide Switch: Use the slide switch to set probe attenuation.
- 2--Compensation Trimmer: For frequency compensation adjustment in 10x mode.
- 3--Ground Lead: Use the alligator clip to attach the probe to a ground reference.
- 4--Hook Tip: Retractable hook tip.
- 5--BNC Connector: Connect to the oscilloscope measuring channel.
- 6--Adjustment Tool: Use the adjustment tool for probe compensation adjustments.
- 7--BNC Adapter :Realize the mutual conversion of signal.
- 8--Locating Sleeve: Using locating sleeve could ensure the stability and reliability of the tip exposed to the test point.
- 9--Marker Rings: Attach the matched color rings onto the probe cable and shaft to identify different channels.
- 10--Ground Spring: Provides shorter grounding path for better signal integrity.
Probe Characteristics
Attenuation ratio | 1X & 10X |
Bandwidth | 80MHz |
Rise time | 4.3ns |
Input Resistance | 1MΩ/10MΩ±2% |
Input Capacitance | 1X: 85pF~120pF 10X: 185pF~22.5pF |
Max. Input Voltage | 1X: 150VRMS CAT I & 10X:300V RMS CAT II |
Compensation Range | 10pF ~ 35pF |
Operation Temperature | -10℃ ~ +55℃ |
Humidity | -40℃or below ≤90%+41℃ to+50℃≤60% |
Altitude | Operating 3000m; Non-operating 15000m |
Cable Length | 130cm |
Weight About | 55g |
Safety | IEC61010-031 |
Accessory Kit
Retractable Hook Tip | 1 |
Adjustment Tool | 1 |
Locating sleeve | 2 |
Marker Rings | 8 |
Ground Lead | 1 |
Ground Spring (Above 100MHz) | 1 |
BNC Adapter (Above 200MHz) | 1 |
Channel | 2CH+DMM | 2CH+AFG+DMM | 2CH | 2CH+AFG | 2CH | 8CH |
---|---|---|---|---|---|---|
Bandwidth | 40MHz | 70MHz | 100MHz | 150MHz | 100MHz | 100MHz |
Sample | Direct charge | Direct charge | Direct charge | Direct charge | Direct charge | USB |
DMM | ✓ | ✓ | ✓ | ✓ | ✓ | |
Record Length | Max. 6K for single-channel; 3K samples per dual-channel Max. 6K for single-channel; 3K | Max. 6K for single-channel; 3K samples per dual-channel Max. 6K for single-channel; 3K | Single channel maximum 8M,Two channels maximum 4M | Single channel maximum 8M,Two channels maximum 4M | 40K | 4K |
Sample Rate Range | 250MSa/s(Single-channel), 125MSa/s(Dual-channel) | 250MSa/s(Single-channel), 125MSa/s(Dual-channel) | 1GSa/s (single channel),500MSa/s (two channels) | 1GSa/s (single channel),500MSa/s (two channels) | 1GSa/s (single channel),500MSa/s (two channels) | 2.4MSa/s |
AFG | ✓ | ✓ | ||||
Arbitrary Waveform | 250MSa/s | 200MSa/s |
![PP80B 2Pcs Oscilloscope Scope Clip Probe 1X:10X Oscillograph Rapier 80Mhz](https://autods-scraper-images.s3-us-west-2.amazonaws.com/b7eeb5abbc1121c79ac798e87ae573ef.png)
ABOUT US
Our goal is to give to you the best service possible. We will try to make you happy in any way possible.
We have a big catalogue for you and we use third warehouses and suppliers for giving you the best.
If you get any issue with your item or you order, contact us anytime and we'll work together for finding the solution that fit better for you.Don't worry :)!
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to for anybody and we usually delivery within 48-72 hours, but keep in mind that our maximum timefrime is shipping within 2-3 days and delivery within 4 days. But we will do our best for getting to you your package within 48 hours.
If your package is late, please contact us before taking any action, we will help you for sure.
For some address the shipping couldn't be available, we keep the rights to cancel any order for addresses issues without responsability and any kind of feedback. Please understand that not all the couriers can ship in particolary addresses :)!
RETURNS
We offer a 30-Day Return Policy on items in which you are not completely satisfied with.
If youhave any issue with your item, contact us before open any case, we will find the best solution for you and we'll be happy to help you to return the item or giving you a refund.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. After you get your item, remind to leave a positive feedback to us! :)
If there's a problem, message us! We're happy to help.