The iCarsoft VOL V2.0 is a professional fault diagnosis tool designed specifically for VOLVO/SAAB vehicles. It is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch color display accompanied by a user friendly interface that requires no additional software. As an added bonus, the scanner is equipped with full OBDII capabilities that allows you to scan all engine readings and related trouble codes (check engine light) on ANY vehicle make/model 1996 and newer.(U.S. only)

This tool is the newest version in the iCarsoft line of products and replaces the VOLII. Features for the iCarsoft VOL V2.0 include the following:

Oil/Service/Brake Service Reset Function

The iCarsoft 2nd Generation Diagnostic Tools allow you to reset Oil,Service, and Brake Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.

Battery Management System (BMS)

Registers new battery to the BMS during battery replacement.

EPB Reset Function

Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position - Replace - Re-activate.

ECTS Reset Function

After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models.

DPF Regeneration or Replacement

Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported.

Compatible Vehicles

For VOLVO Years 1996-2017

Designed to work on all 1996-2017 Volvo vehicles

For most SAAB vehicles Years 1998-2012

1998-2012 --- Saab 9-3

1998-2010 --- Saab 9-5

2005-2009 --- Saab 9-7x