3A 6-28V
The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load.
Main technical parameters:
Input supply voltage:6V-28V DC
The maximum output power: 80W
The maximum continuous output current :3A
Duty Cycle adjustable:5%-100%
3A 12-36V
Specifications:
Input voltage: DC12V - 36V
Sustained current:3A,max.6A(Need to add a cooling fan when max. current)
PWM Duty Cycle:0 -100%
PWM Frequency:500KHz
Material: Plastic, metal
Size (L*W*H):56mm*36mm*22mm
10A 12-40V
Specification
Model: CCMHC
Working Voltage: DC 12V - DC 40V.
Control Power:0.01 - 400W.
Current: Rated 8A, Max 10A.
Static Current:0.02 A ( Standby ).
PWM Duty Cycle:10% -100%.
PWM Frequency:13 KHz.
Material: Plastic, metal.
Size (L*W*H): 6cm x 5.5cm x 2.8cm/2.36"x 2.16"x1.10"(approx)
4 hole diameter: 3 mm(approx)
20A 10-60V
Features:
Operating voltage: DC 10V-60V
Output Current: 0 to 20A.
Frequency:25KHz.
Continuous power: Max 1200W
Speed range: Motor zero speed to maximum motor speed
The maximum current up to 20A radiator or heat required to increase the fan
Material: Plastic, metal
Size (L*W*H):76mm*44mm*26mm
15A 6-90V
Features:
Control the speed of a DC motor with this controller
High efficiency, high torque, low heat generating
With reverse polarity protection, high current protection
Working Voltage: DC 6V - DC 90V
Control Power: 0.01 - 1000W (Maximum current 15A)
Static Current: 0.005 A ( Standby )
PWM Duty Cycle: 0% -100%
PWM Frequency: 15 KHz
Size (L x W x H ): Approx. 64 x 59 x 30 mm
Material: Plastic, metal
30A 6-60V
Specifications:
Input Voltage: DC6V-60V
Output Voltage: Linear with load(voltage drop at motor 2 terminals )
Output Current: 0A-30A
Continuous Current: <20A
Speed Range: 0% to 100%(variable)
Regulation Method: Potentiometer(Linear)
Regulation Type: Regulating Current(cannot be used as a voltage regulator)
Control Frequency: 15KHz(pulse width)
Wiring Type: Screw terminal
Rotary Knob: 100K with switch(270°)
Size: 75 x 56 x 28mm / 2.95 x 2.2 x 1.1"
10000W AC220V
Specifications:
Operating Voltage: AC 220V
Maximum Power: 10000W
Voltage regulation: 10-220V
Max Current: 100A
Dimension (Lx W): Approx. 9.8 x 5.5cm / 3.86 x 2.17"
10-60V
Features:
VCC positive supply 10-60V, be sure to set before energizing voltage adaptation
GND Negative , if you want to reduce the external interference shielding box connected to terminals or here at the cathode connected to the power supply
M+ Motor positive
M- motor negative
Length: 9.5cm width: 7cm height: 3.5cm Length of line: 40cm
Control port :
5V: driver board internal 5V power supply, the output capacity of less than 100mA, with potentiometer mode is recommended only to use , do not drive other circuits
PWM: external PWM control signal input level range ,3-20V , 2mA current requirements ;
ADJ: external 0-5V or 0-10V control signal input
GND: ground control signals , such as the shield shell is not allowed to pick pick here is also not allowed in this place other circuits connected GND,
DOWN: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
UP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
STOP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
3A 80W PWM
Description:
Input voltage: DC6V-28V
Maximum current: 3A
Potentiometer with switch function
Size: 32mm * 50mm * 15mm
Cable length:20cm
3A 80W 1203B PWM
Features:
- Color: As the pictures show.
- Material: Metal.
- Size: 5 * 3.2 * 1.5cm.
- The input power range is DC6-28V.
- Control the forward or reverse direction and the stop of DC motor by switch.
- Potentiometer with switch function.
- The switch cable length 15cm.
Warning: Do not reverse positive and negative power loads. This will damage the controller!
Package Include:
1 x Motor Speed Control Switch