Details
DRAGON 1/35 6815 WW.II German Vollkettenaufklarer 38 w/7.5cm Kanone 51 L/24
 
[About Vehicle]
- The German army in World War II light tank destroyer using components of the Czech Republic in the 38 (t) tank, developed a Hetzer, was deployed.
- Produced from 1944, it has been in operation are also made, but several variations type.
- Tanks for that one is power reconnaissance, is 38 Equation reconnaissance tank.
- Use of the vehicle body of the tank recovery vehicle of the open-top, was equipped with a 24-caliber gun 7.5cm K51 there.
- Intended for use in the Eastern Front, the prototype by out-union, then, completed in September 1944, it takes over BMM's Czech Republic.
- Without, but tests have been carried out are mass-produced, it will not end in the left of the prototype.

[The model]
- Topic in the military modeler of the Dragon of the new series, so far is the German exotic Beast of kit that rely on the spot to minor models that have not been quite attention.
- Reproduced in detail in the 1/35 scale the 38 Formula reconnaissance tanks equipped with a 7.5cm gun K51 based on the body of the Hetzer in this kit.
- Set based on the kit of Tank Destroyer 38 (t) Hetzer, lower part of the vehicle body is upgraded load wheel, the idler wheel parts. It tightens the foot.
- And, fighting compartment of the open-top to create the upper part to the new. We firmly three-dimensional of the vehicle body shape.
- Driver's vision port on the storage box on the vehicle body front and, also modeled headlight.
- It also increases the feeling of finishing the case to be attached to the top of the side surface of the vehicle body armor.
- Of course 24 caliber 7.5cm gun K51 to show a presence in the fighting compartment of the open-top began a gun carriage from the gun barrel, mechanical to detail. Condensed reproduction can enjoy.
- Also available etched parts in the exhaust pipe part of the rear portion of the vehicle body. It tightens the rear view.
- A reconnaissance tanks 1 Both of the prototype vehicle is said to only was completed, but it is finally start mass production from the dragon.
- It is already happy kit to military fan to enrich the Hetzer-based vehicle and both the collection of the sale.

[Main Features]
- 38 expression reconnaissance tanks equipped with a 7.5cm gun K51 of the vehicle body to the base of the Hetzer reproduced in detail in the 1/35 scale
- Of the open-top fighting compartment to create an upper part to a new
- Set a kit Hetzer to the base, the lower body is upgraded load wheel, the idler wheel parts
- The vehicle front to the driver's vision port in the storage box and,, headlight also modeled
- 24 caliber 7.5cm gun K51 to show a presence in the fighting compartment of the open-top began a gun carriage from the gun barrel, mechanical finish up details
- Also available etched parts in the exhaust pipe part of the rear portion of the vehicle body

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 38.1 x 24.5 x 8.2 cm / 543g
 

Copyright©2017 DataCaciques

Details
DRAGON 1/35 6815 WW.II German Vollkettenaufklarer 38 w/7.5cm Kanone 51 L/24
 
[About Vehicle]
- The German army in World War II light tank destroyer using components of the Czech Republic in the 38 (t) tank, developed a Hetzer, was deployed.
- Produced from 1944, it has been in operation are also made, but several variations type.
- Tanks for that one is power reconnaissance, is 38 Equation reconnaissance tank.
- Use of the vehicle body of the tank recovery vehicle of the open-top, was equipped with a 24-caliber gun 7.5cm K51 there.
- Intended for use in the Eastern Front, the prototype by out-union, then, completed in September 1944, it takes over BMM's Czech Republic.
- Without, but tests have been carried out are mass-produced, it will not end in the left of the prototype.

[The model]
- Topic in the military modeler of the Dragon of the new series, so far is the German exotic Beast of kit that rely on the spot to minor models that have not been quite attention.
- Reproduced in detail in the 1/35 scale the 38 Formula reconnaissance tanks equipped with a 7.5cm gun K51 based on the body of the Hetzer in this kit.
- Set based on the kit of Tank Destroyer 38 (t) Hetzer, lower part of the vehicle body is upgraded load wheel, the idler wheel parts. It tightens the foot.
- And, fighting compartment of the open-top to create the upper part to the new. We firmly three-dimensional of the vehicle body shape.
- Driver's vision port on the storage box on the vehicle body front and, also modeled headlight.
- It also increases the feeling of finishing the case to be attached to the top of the side surface of the vehicle body armor.
- Of course 24 caliber 7.5cm gun K51 to show a presence in the fighting compartment of the open-top began a gun carriage from the gun barrel, mechanical to detail. Condensed reproduction can enjoy.
- Also available etched parts in the exhaust pipe part of the rear portion of the vehicle body. It tightens the rear view.
- A reconnaissance tanks 1 Both of the prototype vehicle is said to only was completed, but it is finally start mass production from the dragon.
- It is already happy kit to military fan to enrich the Hetzer-based vehicle and both the collection of the sale.

[Main Features]
- 38 expression reconnaissance tanks equipped with a 7.5cm gun K51 of the vehicle body to the base of the Hetzer reproduced in detail in the 1/35 scale
- Of the open-top fighting compartment to create an upper part to a new
- Set a kit Hetzer to the base, the lower body is upgraded load wheel, the idler wheel parts
- The vehicle front to the driver's vision port in the storage box and,, headlight also modeled
- 24 caliber 7.5cm gun K51 to show a presence in the fighting compartment of the open-top began a gun carriage from the gun barrel, mechanical finish up details
- Also available etched parts in the exhaust pipe part of the rear portion of the vehicle body

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 38.1 x 24.5 x 8.2 cm / 543g
 
 
 
 
Thank you visit my store,
 
 I am a  Plastic Assembly Model wholsaler . 
 
Hope there you can find your favourite model and we will supply best service,
 
any question please free contract our customer service. 
 


* Your order will be shipped from our warehouse where the item has been accurately picked, securely packed and shipped in a professional manner.

tax authorities before bidding. However , most of our items can reach to buyers without any taxes

All returns accepted
Your buyer should conatct you within 30 days after receiving the item Refund given as money back
Return shipping will be paid by your buyer
Additional return policy details:None

When you receive your item
If you are not satisfied with our items
Please feel free contact us
I will give you the best solution


On Jun 6, 2023 at 21:48:10 PDT, seller added the following information:

DataCaciques