we have lots of items in stock，if you need more items，please contact us
MINI Wemos D1 ESP32
 
MINI Wemos D1 ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 For Arduino
 
Shipping list:

1. Lange weibliche pins x4pcs
2.kurze weibliche pinsx4pcs
3.Normal pinsx4pcs
4. mini D1 ESP32 Black x1pcs
 
 
ESP32 Module
ESP-WROOM-32 is Powered by Espressif’s most advanced SoC, the ESP-WROOM-32 features high performance, a wide range of peripherals, Wi-Fi and Bluetooth radio, which provide a complete solution tailored to advanced IoT applications.
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS 
Integrated 520 KB SRAM 
Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP 
Integrated dual mode Bluetooth (classic and BLE) 
16 MByte flash 
2.2V to 3.6V operating voltage 
-40°C to +125°C operating temperature 
On-board PCB antenna / IPEX connector for external antenna 
Supports sniffer, station, softAP and Wi-Fi direct modes 
Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b 
Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n 
Minimum receiver sensitivity of -98 dBm 
135 Mbps UDP sustained throughput 
2.5 µA deep sleep current

 














Wi-fi		 802.11 b/g/n/e/i
802.11 n (2.4 GHz), up to 150 Mbps
802.11 e: QoS for wireless multimedia technology
WMM-PS, UAPSD
A-MPDU and A-MSDU aggregation
Block ACK
Fragmentation and defragmentation
Automatic Beacon monitoring/scanning
802.11 i security features: pre-authentication and TSN
Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
Infrastructure BSS Station mode/SoftAP mode
Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
UMA compliant and certified
Antenna diversity and selection
Compliant with Bluetooth v4.2 BR/EDR and BLE specification


















Bluetooth		 Class-1, class-2 and class-3 transmitter without external power amplifier
Enhanced power control
+10 dBm transmitting power
NZIF receiver with -98 dBm sensitivity
Adaptive Frequency Hopping (AFH)
Standard HCI based on SDIO/SPI/UART
High speed UART HCI, up to 4 Mbps
BT 4.2 controller and host stack
Service Discover Protocol (SDP)
General Access Profile (GAP)
Security Manage Protocol (SMP)
Bluetooth Low Energy (BLE)
ATT/GATT
HID
All GATT-based profile supported
SPP-Like GATT-based profile
BLE Beacon
A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
CVSD and SBC for audio codec
Bluetooth Piconet and Scatternet

 

ESP32 vs ESP8266:

 

ESP32 ESP8266
Ethernet MAC Interface Nicht vorhanden
GPIOs für 10 Touch-Sensoren Nicht vorhanden
Temperatur-Sensor (on-chip) Nicht vorhanden
Remote-Controller-Funktionalität Nicht vorhanden
Hall-Sensor Nicht vorhanden
Digital-to-Analog Converter (DAC) Nicht vorhanden
CAN 2.0 Nicht vorhanden
Analog-to-Digital Converter (ADC): 16 Kanäle mit 12-Bit 
SAR-ADC mit Unterstützung für einen Low-Noise Amplifier (LNA)		 10-bit ADC, kein LNA
2 I2C-Schnittstellen 1 I2C-Schnittstelle
16 Kanäle für PWM 8 Kanäle für PWM
GPIOs (General-Purpose Input/Output): 36 GPIOs: 17
4 SPI-Schnittstellen mit Quad-SPI und maximal 80 MHz 3 SPI-Schnittstellen mit Quad-SPI und maximal 80 MHz

 


Package included:

1PCS ESP-32S WLAN & BLE IoT Module Dual-Core CPU Ethernet Port MCU ESP8266 240MH

EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

We are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more