NEW IN BOX. FULL FACTORY WARRANTY. NOT RECONDITIONED!
BUY and Support USA Companies!
Sure, you may be able to buy one that's been sitting on a shelf cheaper... but these are factory fresh from rotating stock!
The Type T1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The pneumatic output is both linear and proportional to the analog 4-20 mA input command signal. Bellofram's most popular general purpose transducer combines performance, reliability, and value for many precision control applications. Features include a small size, built-in volume booster, external zero & span adjustments, and field reversible operation. All Type 1000 transducers can be mounted inline or use the wall/panel mounting bracket which is included with each unit. The Type 1000 is a force balanced device in which the coil is suspended in the field of a magnet by a flexure. Current flowing through the coil generates axial movement of the coil and flexure. The flexure moves against the end of a nozzle, and creates a back pressure in the nozzle by restricting air flow. The back pressure acts as a pilot pressure to an integral booster relay. Consequently, as the input signal increases (or decreases, for reverse acting), output pressure increases proportionally. Applications include valve actuators & positioners, HVAC systems, clutches & brakes, paper handling, textile processes, and many other industrial applications where precise pneumatic control is required.
OTHER RANGES AVAILABLE. CONTACT US FOR A QUOTE
Electrical Input Signal: 4-20 mA, 2 wire
Pneumatic Output: 3-15 PSI
Accuracy: Linearity < 1.0%, Hysteresis < 1.0%, Repeatability < 0.5%
Pressure Ports: 1/4" female NPT inlet & outlet
Gauge Ports: 1/4" female NPT (located on front & back of unit)
Flow Rate: 4.5 SCFM @ 25 PSI supply pressure, 12 SCFM @ 100 PSI supply
Supply Pressure: 100 PSI maximum
Supply Pressure Sensitivity: < 0.1% of span per PSI at midrange
Supply Air: Oil free clean dry filtered air (instrument quality)
Low Air Consumption: 0.1 SCFM @ midrange
Vibration: Minimize vibration for maximum pressure stability
Weight: 2.1 pounds
Temperature Range: -20F to 150F
Zero & Span: External adjustment on front of unit for recalibration
Electrical Connection: 1/2" conduit with 18" wire leads - CE rated
Field Selectable: Direct acting or reverse acting
Mounting: In-line, wall/panel mount (bracket included)
Housing Material/Seals: Aluminum (painted)/Nitrile seals
PAYMENT MUST BE MADE WITHIN 72 HOURS OF AUCTION END UNLESS OTHER ARRANGEMENTS ARE MADE WITH SELLER.
Check with us regarding international shipping or outside the continental US.