TORX PIN BUTTON HEAD SCREWS M10 X 30

COMPLETE WITH

TORX PIN BUTTON HEAD BARREL NUTS M10 X 20

YOU WILL RECEIVE THE FOLLOWING:

12 SCREWS +

12 BARREL NUTS +

2 DRIVE BITS IN CHROME VANADIUM CR-V STEEL

(ONLY 1 OF EACH PART SHOWN IN PHOTO FOR CLARITY)

STAINLESS STEEL GRADE A2

ANTI-TAMPER SECURITY 

6 LOBE STAR PIN

THESE ARE VERY HIGH QUALITY SCREWS & BARREL NUTS

THE FULL RANGE OF THESE IS AVAILABLE IN OUR eBAY SHOP.

THESE ARE DESIGNED TO SECURE AN

OVERALL THICKNESS OF BETWEEN 38 - 40mm

(THIS ALLOWS FOR A MINIMUM OF 10mm LENGTH OF

THREAD ENGAGING INSIDE THE BARREL NUT)

IF WASHERS ARE USED (NOT SUPPLIED) UNDER ONE OR BOTH HEADS OBVIOUSLY

YOU WILL BE ABLE TO USE ON THINNER MATERIALS.

OR IF NECESSARY YOU COULD CUT BACK THE FULLY THREADED SCREWS

TX45 PIN DRIVE BITS FOR BOTH THE SCREW AND NUT WILL BE SUPPLIED

TO DRIVE THESE.  

TX45 "L" SHAPE DRIVE KEYS ARE ALSO AVAILABLE IN OUR eBAY SHOP

STAINLESS STEEL WASHERS TO SUIT ARE AVAILABLE IN OUR eBAY SHOP

M10 ARE REQUIRED FOR THE SCREW &

M12 WOULD BE SUITABLE FOR THE BARREL NUT

PENNY WASHERS ARE ALSO AVAILABLE IN OUR eBAY SHOP

IF YOU NEED TO SPREAD THE LOAD

SQUARE SECTION SPRING WASHERS ALSO AVAILABLE

13mm DIAMETER CLEARANCE HOLE REQUIRED FOR BARREL NUT

PLEASE CONTACT US IF YOU REQUIRE ANY FURTHER INFORMATION

inoxca UK