FOR E27 white/black Light Bulb Camera
Features:
E27 lamp socket interface, plug in and automatically turn on, then it can be matched and used
1080P 24H full color HD surveillance
The lens angle can be adjusted through the APP, without blind spot monitoring. The left and right adjustment angle of the lens is 355°, and the up and down adjustment angle is 90°
Support voice two-way intercom, communicate with family members at any time
Sensitive mobile detection function, APP push notification, control home safety
Comes with 4 high-brightness LED lights, which can be turned on at night to achieve full-color night vision
Support HD online playback
Supports up to 128G memory card expansion (not included)
Specifications:
APP:YUNYI
Type : IP camera
High Definition : 1080P(Full HD)
Lens (mm) : 3.6mm
Sensor : CMOS
Megapixels : 1080P
Alarm Action: Phone Alarm
Video Compression Format: H.264
Power supply: E27
Minimum Illumination (Lux) : 0.1
Connectivity: IP/Network Wireless
TF Card : 128G TF Card (Not included)
Viewing Angle: 355°(Level)/90°(Vertical)
Night mode: infrared night vision
Supported Mobile Systems: Android/ios
Power supply: E27 110-240V
Power waste:<5W
Instruction Manual
1. Download the Yi IoT app. (IOS or Android).
2. Create a account (free).
3. Login to the application from your phone.
4. Plug the camera into a compatible light bulb capable socket. Power on the source (lamp/socket, etc.).
5. With a toothpick, press gently on the camera where it says RESET. Hold down for 10 seconds until you hear the camera speak "RESET COMPLETED".
6. On the Yi IoT App, select 'Add device'.
7. The app should prompt you to scan the QR code on the back of the camera. Scan the QR code from the app.
8. The next screen on the app should show available wifi networks. Select your wifi network, enter your wifi password, and click 'Confirm'
9. The next screen on the app should show a QR code. Hold the QR code in front of the camera and wait until the camera speaks. Within 30 seconds, the camera should speak " WIFI connection completed". If it does not connect, re-do steps 6-9 until this happens.
10. The last screen will prompt you to label the camera (Livingroom, patio, office, etc.). Click finish. When viewing your camera from the app, it may prompt you to set a password for the camera. The password is specifically for the camera.
Still not working? Skip to Step 1-B.
1-B. Repeat steps 1-9, but instead of holding the QR on your phone in front of the camera, click 'No voice prompt of scanning successfully'. Then click 'Use AP hotspot connection'.
2-B. Select your wifi network in the app and enter your wifi password.
3-B. Go to your phone's wifi settings and connect to the camera. Once your phone is connected to the camera via WIFI, the camera will speak out instructing to return to the Yi IoT app.
4-B. Once connected to the camera, return to the Yi IoT app and click 'Connect AP spot'.
5-B. The camera should begin speaking and connecting to your wifi network. Within 30 seconds it should speak saying 'Wifi connection completed'.
6-B. The last screen will prompt you to label the camera (Livingroom, patio, office, etc). Click finish. When viewing your camera from the app, it may prompt you to set a password for the camera. The password is specifically for the camera.
Package Included:
1 X black/white Panoramic Camera
1 X Manual
