About this item

Most Commonly Used Reset Services：

Oil Rest Service: This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.

EPB Service

This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

SAS Service

Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. Therefore,the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration.

TPMS Service

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.

BMS Service

The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement and activate the rest state of the vehicle.

IMMO:

The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection.

This application can access the key chip, read, retrieve and write key information, support read PIN/CS (all key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, Backup/Restore IMMO Data, BMW FEM/BDC Key Learning and ECU Adaptation.

Programming:

The Programming application requires connection between the tablet and the XP200, and no vehicle connection is required. This application can access the key chip, read, retrieve and write key information, as well as other key related functions

1.Read PIN/CS (AII key Lost)

2.Key Generation

3.Key Learning/Remote Learning

4.Backup/Restore IMMO Data

5.IMMO ECU Reset/Adaptation,Refresh/Coding

6.For BMW FEM/BDC Key Learning and ECU Adaptation

7.For VW/For AUDI MQB Key Learning,48 Transponder(96-bit)Add Key ,All Key Lost,A6 AII Key Lost

XP200：

The XP200 is specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP200 can read/write key chip data quickly and accurately.

IMMO: The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection. The application retrieves vehicle IMMO information and performs IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. Programming: The Programming application requires connection between the tablet and the XP200, and no vehicle connection is required. This application can access the key chip, read, retrieve and write key information, as well as other key related functions.

XP200 Key Programmer for IMMO ECU Programming:

Specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP200 Key Programmer can read/write key chip data quickly and accurately.

Advanced 28+Maintence Servicems:

Including Oil Reset / TPMS Reset / Headlamp / CHG Tire Size / TEC Learning / EPB Reset / BMS Reset / ABS Bleeding / Throttle Matching / Aftertreatment / Injector Coding / SAS Reset / Suspension / WIN DR ROOF / Seats / ODO Reset / Lang Change / ABS SRS / Cylinder / VTG Learn / Clutch Reset / Trans Adaption / Airbag Reset / A/F Setting, etc.

6 Commonly Used Repair Functions:

BMS Reset: Re-match the battery control module and motoring sensor.

ABS Bleeding: Bleed the air of a brake system to restore ABS brake sensitivity.

Oil Reset: Reset the oil life system and turn off the oil light to start a new cycle.

TPMS Reset: Reset tire pressure and turn off the TPMS light after replacement.

EPB Reset: Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.

Throttle Matching: Cycle the motorized throttle body through various states (idle, part throttle, WOT) to relearn their positions.