5kWp 48V off grid solar bundle with 4Kw Victron inverter charger, 48V 670ah Traction Batteries & MPPTs
Package including:
24 x | ![]() | 2V Traction Battery 670ah Flooded Deep Cycle |
18 x | ![]() | 410W Canadian Solar Mono Half Cell Panels - Super High Power Mono PERC HiKU, MCS Approved |
1 x | ![]() | Victron MultiPlus 48/5000/70-100 230V VE.Bus (4000W) |
2 x | ![]() | 60A Outback FM60 MPPT Solar Charge Controller - 150VOC PV |
20 x | ![]() | STÄUBLI MC4 Solar Connectors - Pair (Male & Female) suitable for 4mm and 6mm cable only |
50 x | ![]() | 6mm² Solar Cable - per meter |
2 x | ![]() | 300A Battery Isolator Switch - Blue Sea M Series |
5 x | ![]() | STÄUBLI MC4 Connector Y Splitter 2 way branch - Pair (Male & Female) - 32.0018 & 32.0019 |
1 x | ![]() | MC4 Crimping Tool - Crimpers for Solar PV Connectors 2.5-6mm2 Cable - crimper |
2 x | ![]() | 16mm Cable - M8 Lug to Bare Wire - 2 Meter |
2 x | ![]() | 16mm Cable - M10 Lug to Bare Wire - 2 Meter |
1 x | ![]() | 35mm Cable - M8 to M10 Lugs - 1 Meter |
1 x | ![]() | 35mm Cable - M8 to M8 Lugs - 1 Meter |
2 x | ![]() | 35mm Cable - M8 to M10 Lugs - 30cm |
1 x | ![]() | Digital Multimeter 500V AC/DC for setting up and testing your system - including battery |
2V Traction Battery 670ah Flooded Deep Cycle
NEW 670ah c20(560 ah c5)
2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE EXPECTANCYTO 80% d.o.d
198mm x 83mm x 694.5mm height, 32.6kg wet
Charge Voltage Settings
Bulk/Absorb 2.40v per cell
Float 2.23v per cell
EQ 2.47v per cell
Other information
The battery will come strapped together on a pallet and will be fully charged. There will be all cables necessary for connection between cells, but the connections will not be made. Listing is NOT inclusive of battery box. If you would like a dedicated battery box we would be pleased to quote when we know your requirements.Auto watering can also be requested as a quote.
The connectors are a Enersys type, that protect the M10 bolt from corrosion. If you take a flat head screw driver you can pop the cap off which will expose the bolt.
The bolts are M10.
Configuration is normally 3 x 4 or 6 x 4 (as above) etc .
If unusual - eg all in a row - we will request specific cables to manage this from the supplier - please let us know your requirements.
A forklift is heavily advised.
410W Canadian Solar Mono Half Cell Panels - Super High Power Mono PERC HiKU, MCS Approved
FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE
Super High Efficiency Mono PERC Module (CS6R-410MS) Dimensions: 1722X 1134X 30mm
Cables from rear junction box are approx 1m positive and 1m negative.
CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.
With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs.
The Super High HiKu mono modules with dimensions of 1722X 1134X 30mm, have the following unique features:
MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY):
- Lower internal current, lower hot spot temperature
- Cell crack risk limited to smaller area of the cell
- Innovative symmetrical module design means better shading tolerance
- Heavy snow load up to 5400Pa and increased wind load up to 3600Pa
Cell: 120 x dual-cell Mono, 156 x 78 mm
Dimensions: 1722X 1134X 30mm
Weight: 21.3kg
Victron MultiPlus 48/5000/70-100 230V VE.Bus (4000W)
Victron batteryinverter for useoff grid or on grid as a battery storage inverter. This model has a 100A AC in transfer relay. See the data sheetunder the downloads tab or contact us for further information. Please consider adding theVictron MK3 USBinterface so as the unit canbe programmed to your application.
Multi-functional
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.
Download full spec sheet
60A Outback FM60 MPPT Solar Charge Controller - 150VOC PV
These are the best charge controllers on the market, they are solid, reliable and what we use for The Bimble Inn.
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Technologies. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).
Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled system integration.
FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
A note on Outback and lithium: Outback MPPT's can't be controlled by a Lithium battery BMS that needs comms, so you can't use e.g. Pylontech with them. But, you can set up certain charging profiles that are suitable for lithium batteries that have a dumb BMS that doesn't need communication. With Outback systems we sell and recommend Gcell batteries.
Using an Outback controller would invalidate any Pylon battery warranty, as the Pylons need to be able to control the charging voltage and current.
Voltage | Recommended PV Max | Absolute Max |
12V | 750W | 900W |
24V | 1500W | 1800W |
48V | 3000W | 3600W |
FLEXmax 60 Specifications | |
---|---|
Nominal Battery Voltages | 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) |
Maximum Output Current | 60 amps @ 104° F (40°C) with adjustable current limit |
Maximum Solar Array STC Nameplate | 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts |
NEC Recommended Solar Array STC Nameplate | 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts |
PV Open Circuit Voltage (VOC) | 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum |
Standby Power Consumption | Less than 1 Watt typical |
Power Conversion Efficiency | 98.1% @ 60 Amps in at 48 VDC System voltage - Typical |
Charging Regulation | Five Stages: Bulk, Absorption, Float, Silent and Equalization |
Voltage Regulation Set points | 10 to 80 VDC user adjustable with password protection |
Equalization Charging | Programmable Voltage Setpoint and Duration - Automatic Termination when completed |
Battery Temperature Compensation | Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell |
Voltage Step-Down Capability | Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input |
Programmable Auxilary Control Output | 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC) |
Status Display | 3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total |
Remote Display and Controller | Optional Mate or Mate2 with RS232 Serial Communications Port |
Network Cabeling | Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) |
Data Logging | Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production |
Hydro Turbine Applications | Consult factory for approved Turbines |
Positive Ground Applications | Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) |
Operating Temperature Range | Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C) |
Environmental Rating | Indoor Type 1 |
Conduit Knockouts | One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom |
Warranty | Standard 5 year / Available 10 Year |
Weight - Unit | 11.65 lbs (5.3 kg) |
- Shipping | 14.55 lbs (6.4 kg) |
Dimensions - Unit | 13.5 x 5.75 x 4" (40 x 14 x 10 cm) |
- Shipping | 18 x 11 x 8" (46 x 30 x 20 cm) |
Options | Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2 |
Menu Languages | English & Spanish |
STÄUBLI MC4 Solar Connectors - Pair (Male & Female) suitable for 4mm and 6mm cable only
STÄUBLI MC4 Solar PV connectors - Pair
Connect your solar modules together with ease using these safe and durable genuine StaubliMC4 connectors.Snap-in lock.MC4 crimp tool required to make onto cable ends.YOUTUBE VIDEO
Manufacturer SKU
32.0016P0001-UR & 32.0017P0001-UR
See DOWNLOADS TAB for datasheet
Technical specifications
Connection | crimp connection | |
Version | jack | |
diameter | 5.8 mm | |
Cable diameter | 5.9 to 8.8 mm | |
Cable cross-section | 4.0-6.0 mm² | |
Rated voltage IEC | 1000 V | |
Rated current IEC | 39 A |
UL recognized component, in accordance with UL 6703 |
*Please note male and female refers ot the metal conductor and not theplasticinsulator*
6mm² Solar Cable - per meter
6mm²Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
300A Battery Isolator Switch - Blue Sea M Series
300A Battery isolator switch, 900A for 30 secs, up to 48 Volt, M10 connection. Can be use on 12, 24 or 48 Volt system as long as switch current rating is not exceeded.
BLUE SEA M-SERIES SELECTOR SWITCHES
M-SERIES BATTERY SWITCHES
300 Ampere continuous rating.
- Tin-plated copper studs for maximum conductivity and corrosion resistance
- Studs accept 3⁄8" (M10) ring terminals
- 7⁄8" (22mm) stud length accepts multiple cable terminals
- One-piece terminal stud design never loosens over time
- Case design allows surface or rear panel mounting options
- Label with international legends
- Tactile indicator conveys knob position by feel
Regulatory
- CE marked, ISO 8846
- UL Listed - UL 1107 electric power switches
- Meets ABYC requirements
- Meets UL1500 and SAE J1171 external ignition protection requirements
- IP66 protects against powerful water jets
STÄUBLI MC4 Connector Y Splitter 2 way branch - Pair (Male & Female) - 32.0018 & 32.0019
STÄUBLI MC4 Solar PV connectors - Pair of Y Branches
Connect your solar modules together with ease using these safe and durable MC4 connectors. This pair of "Y" shape connectors (one in a male to female, female configuration, and one in a female to male, male configuration) will allow you to connect panels or strings of panels together. If you need to connect 3 panels together then it is cheaper to use 2 pairs of these than to purchase a 3 way splitter (its about 1/3 of the cost to use these)
Product information:
Technical data | |
Connector system | Ø 4 mm |
Rated voltage | 1500 V DC (UL) |
Rated current | 50 A |
Rated impulse voltage | 12 kV |
Ambient temperature range | -40 °C...+75 °C (UL) |
Upper limiting temperature | 105 °C (Stäubli) |
Degree of protection, mated unmated | IP67 IP2X |
Overvoltage category/Pollution degree | CATIII / 2 |
Contact resistance of plug connectors | ≤0.5 mΩ |
Safety class | II |
Contact system | MULTILAM |
Contact material | Copper, tin plated |
Insulation material | PC |
Locking system (UL) | Locking type |
Flame class | UL94-V0 |
UL recognized component, in accordance with UL 6703 | E343181 |
MC4 Crimping Tool - Crimpers for Solar PV Connectors 2.5-6mm2 Cable - crimper
Description
This industrial quality Multi-Contact tool is a first priority for Crimping MC4 male and female solar contacts, used for the cable(2.5/4/6 mm2)
The excellent handling, easy exchange of the crimping insert bits and the possibility of adding a positioning aid are facts in favour of these crimping pliers.
- High-precision ratchet mechanism for crimps
- 1.2 metric tons pressure at crimping face, with minimal hand effort;
- Interchangeable high-precision crimping die set
Tools Parameters
Capacity: 2.5-6.0mm2
AWG: 26-10AWG
Length: 270mm
Weight: 0.74Kg
16mm Cable - M8 Lug to Bare Wire - 2 Meter
16mm Cable - M10 Lug to Bare Wire - 2 Meter
35mm Cable - M8 to M10 Lugs - 1 Meter
35mm Cable - M8 to M8 Lugs - 1 Meter
35mm Cable - M8 to M10 Lugs - 30cm
Digital Multimeter 500V AC/DC for setting up and testing your system - including battery
A small, low cost multimeter supplied with test leads and holster.
- 3½ digit, 1999 count display
- AC/DC voltage measurement
- DC current
- Resistance measurement (20R to 2MR)
- Diode, continuity and transistor tester
- Square wave output
- Low battery indication
- Requires a 9V PP3 battery (included)
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm
Please note: Our website has better calculations for shipping as it uses clever methods to calculate the shipping price to your postcode.