2V Traction Battery 550ah Flooded Deep Cycle

NEW 550Ah c20(460Ah C5).

2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE EXPECTANCYTO 80% DOD.

198mm x 83mm x 553.5mm height, 26.7kg wet.

Charge Voltage Settings

Bulk / Absorb 2.40Vper cell.
Float 2.23Vper cell.
EQ 2.47Vper cell.

Other information

The battery will come strapped together on a pallet and will be fully charged. There will be all cables necessary for connection between cells, but the connections will not be made. Listing is NOT inclusive of battery box. If you would like a dedicated battery box we would be pleased to quote when we know your requirements.Auto watering can also be requested as a quote.

The connectors are a Enersys type, that protect the M10 bolt from corrosion. If you take a flat head screw driver you can pop the cap off which will expose the bolt.
The bolts are M10.

Configuration is normally 3 x 4 or 6 x 4 (as above) etc .
If unusual - eg all in a row - we will request specific cables to manage this from the supplier - please let us know your requirements.

A forklift is heavily advised.

Outback 48V 3Kw Inverter Charger VFXR3048E - New Model 7 Modes in One

NB: For the VFXR inverter to be grid connected in the Uk, it will need an additional Anti-islanding relayto be G98/99 compliant (please see related products)

THE NEW VFXR-SERIES
7 Features In One Device

GENERATOR MODE -CONNECT THE VFXR TO ANY GENERATOR:
1. Cover current consumption
2. Charge batteries

SUPPORT MODE-CONNECT THE VFXR TO ANY INVERTER TO EXPAND THE OUTPUT POWER:
1. Cover consumption with your inverter (any brand)
2. Cover your additional consumption with the VFXR (in cooperation with any brand)

GRID TIED MODE -INJECT EXCESSIVE POWER TO THE GRID:
3. Charge your batteries
4. Sell not consumed power to the grid

UPS MODE -USE THE BATTERIES IF THE GRID FAILS:
5. Cover consumption with the grid
6. In case of grid failure, switch to batteries without interruption

GRIDZERO MODE -USE THE GRID IF SOLAR POWER IS NOT AVAILABLE AND COVER HIGHER LOADS WITH SMALL INVERTERS:
7. Cover consumption with solar power (even with small inverters)
8. Take additional power from the grid to double the output of your inverter

MINI GRID MODE -USE THE GRID WHEN BATTERIES ARE LOW:
9. Cover consumption with solar power
10. Connect to the grid when batteries are low

BACKUP MODE -COVER GRID FAILURES WITH YOUR SOLAR SYSTEM:
11. Cover consumption with the grid
12. In grid failure, switch to solar system

The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly
any power conversion scenario.

The new FXR features and technologies on the acclaimed FX platform include:

• Both off-grid and grid-tied functionality in one unit
• Seven programmable modes, including GridZero and Support Mode, and built-in networked communications
• Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries
• Easy system upgradability in the field

FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.

Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.

Please Note: The newVFXR range only work with a Mate 3 (the standard Mate or Mate B will not work with them)

Info and Specs on Outback site

410W Canadian Solar Mono Half Cell Panels - Super High Power Mono PERC HiKU, MCS Approved

FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE

Super High Efficiency Mono PERC Module (CS6R-410MS) Dimensions: 1722X 1134X 30mm

Cables from rear junction box are approx 1m positive and 1m negative.

CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.

With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs.

The Super High HiKu mono modules with dimensions of 1722X 1134X 30mm, have the following unique features:

MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY):

• Lower internal current, lower hot spot temperature
• Cell crack risk limited to smaller area of the cell
• Innovative symmetrical module design means better shading tolerance
• Heavy snow load up to 5400Pa and increased wind load up to 3600Pa

Cell: 120 x dual-cell Mono, 156 x 78 mm

Dimensions: 1722X 1134X 30mm

Weight: 21.3kg

80A Outback FM80 MPPT Solar Charge Controller - 150VOC PV

These are the best charge controllers on the market, they are solid, reliable and what we use for The Bimble Inn.

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Technologies. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled system integration.

FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

A note on Outback and lithium: Outback MPPT's can't be controlled by a Lithium battery BMS that needs comms, so you can't use e.g. Pylontech with them. But, you can set up certain charging profiles that are suitable for lithium batteries that have a dumb BMS that doesn't need communication. With Outback systems we sell and recommend Gcell batteries.

Using an Outback controller would invalidate any Pylon battery warranty, as the Pylons need to be able to control the charging voltage and current.

Outback Mate 3s Remote Monitor & Controller

The new MATE3 System Display and Controller makes it easy to program and monitor a OutBack Power System. An intuitive and integrated system configuration wizard makes system setup and programming quick and seamless.

The ability to set unique multi-level user passwords allows the user to secure critical system settings from unintended changes, while still allowing open access to necessary functions.

The MATE3 is packed full of features to make system management simple. The easy-to-read graphical LCD display is backlit for dark operating conditions. Improved tactile buttons and a user programmable “favorite” key give you immediate access to the features you want, while an intuitive scroll wheel interface allows for easy adjustment of system setpoints. Expandable SD card memory allows you to increase data logging capacity as well as upgrade units in the field.

A built-in clock and calendar function enables timer-based programming of inverter and charger operation. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE3 is an Internet enabled device – simply connecting to the Internet will allow full remote system.

By adding the Mate Controller you can also use the outback inverters as a off grid/grid hybrid system allowing you to use the power from your batteries primarily and switching to use the grid when your batteries are low, thus minimising your use of the grid and ensuring you get the best use of your renewable power set-up, and yet never run out of power. Or you can configure an automatic generator start from them if needed.

Product Features:

• Program, Manage, and Monitor
• User Friendly Interface
• Easy-To-Read Graphical Display
• System Configuration Wizard
• Internet Enabled
• Field Upgrade-able
• Up to 1-Year Data Logging
• SD Memory Card Slot

Solar Panel Combiner Box bundle - 4 strings with Din Rail, 10 glands, 4 fuse holders/15A fuses, bus bar, feeder & junction block

This outdoorrated combiner box is for safely combining larger strings of solarpanels >= 3. The box comes fitted with Din railand 10X M20 glandswith a cable outer diameter range of 5 - 10mm.

The enclosurefeatures knock out discs so no drilling is required. Just punch out the number if gland spaces required, and fit theglands.You must selectthe fuse holder, fuses, bus bar, feeder terminaland extraglands ifrequired for yoursystem. See related items tab above to see the breakers that fit. If fusing positive conductors only, select Din rail block to combine the negatives. It is possibleto mount hebox withoutpuncturing it thus maintaining theIP waterproof rating

Outside dimensions: 182 X 180 X 111mm

Inside dimensions: 167 X 165 X 96mm

Effective Din rail length: 150mm

Number of gland knock outs: 8 X M20, 1 X M25 or M32 (top & bottom), 4 X M20, 1 X M32 or M40 (left side and right side)

10mm² Solar Cable - 50 Meter Reel/Drum

10mm tinned copper Solar Cable - Price is per meter simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable, 6.9mm Outer Diameter,Halogen-free cross-linked

Max load: 98A

European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozoneresistant according to BS EN 50396, UV resistant according to HD 605 S2 and is tested for durability according to EN 60216.

Outback Hub 4 Communication Manager

HUB-4 Communication Manager

The HUB-4 communication manager allows the MATE to control and monitor a maximum of fourOutBack products. The inverter/chargers can be operated in a stacked or independent configuration, and OutBackMPPT charge controllers can also be used on any of the four available ports of the HUB-4. Future OutBack products will also be compatible with the HUB-4. The HUB-4 manages both the inter-inverter communications and the MATE-inverter communication. The HUB-4 also can be used with the X-240 autotransformer when series stacked to allow full surge and continuous AC load capacity of each FX to be available on either of the 120 VAC output circuits. When two or more FX inverters are stacked in a parallel or series configuration, the system automatically turns off any excess slave inverters to save power and maximize conversion efficiency. This power save system is fully automatic and works with or without the MATE connected to the system One or two MATE system controllers and displays can be connected to the HUB. One Mate is allowed to program the systems while the other MATE is able to only control and display the system operation. When using a single MATE with a HUB-4, programming can be locked out by moving the MATE from the 1st MATE port to the 2nd MATE port once programming has been completed. The maximum distance from the HUB-4 to the power conversion product should be under 10 feet. OutBack includes two 3 foot long and two 6 foot long CAT5 cables standard with the HUB-4.

70mm² cable - Per Meter

70mm² cable per meter,Class 6 multi-stranded extra flexible tinned copper conductor, 355A rated for 5mins @ 100% Duty cycle

Conductor diameter 9.4mm, Overall diameter includingsheath 16mm

MC4 Crimping Tool Bundle- Crimpers, Strippers, Spanner, Cutting Tool for Solar PV Connectors 2.5-6mm2 Cable - crimper

Tool Kit including:

1 xSolar Crimping Tools(crimping range:2.5,4,6.0mm2),
1 xCable Stripper with cutter for cutting cables 66mm max and stripping cables 2.5-6mm2,
2 xSolar Spanner (1000V/1500V)
1 x Cable Cutting tool (2.5-6mm2)
1 x Solar locator

This industrial quality Multi-Contact tool is a first priority for Crimping MC4 male and female solar contacts, used for the cable(2.5/4/6 mm2)
The excellent handling, easy exchange of the crimping insert bits and the possibility of adding a positioning aid are facts in favour of these crimping pliers.

• High-precision ratchet mechanism for crimps
• 1.2 metric tons pressure at crimping face, with minimal hand effort;
• Interchangeable high-precision crimping die set

Tools Parameters
Capacity: 2.5-6.0mm2
AWG: 26-10AWG
Length: 270mm
Weight: 0.74Kg

6mm² Solar Cable - 50 Meter Reel/Drum

6mm² Solar Cable - Price is fora50 meter reel. If you wish to buy in lower quantity meter lengths, pleaseseehttps://www.bimblesolar.com/6mmcable

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Other colours available on request if bulk order

Crimping tool for Battery terminal lugs 10mm² - 120mm² for crimping heavy duty tinned copper terminals - Professional crimper

Mechanical Hexagonalcrimp tool for 10mm² -120mm² copper tube terminal lugs. For manual crimping of terminallugs and pin ferrulesonto battery cable. 45cm long handles.

STÄUBLI MC4 Solar Connectors - Pair (Male & Female) suitable for 4mm and 6mm cable only

STÄUBLI MC4 Solar PV connectors - Pair

Connect your solar modules together with ease using these safe and durable genuine StaubliMC4 connectors.Snap-in lock.MC4 crimp tool required to make onto cable ends.YOUTUBE VIDEO

Manufacturer SKU
32.0016P0001-UR & 32.0017P0001-UR

See DOWNLOADS TAB for datasheet

Technical specifications

*Please note male and female refers ot the metal conductor and not theplasticinsulator*

DC Fused Disconnect 2-pole NH00 or NH000 size, M8 fixings, 160A DC max

**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**

Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.

The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.

NH00rated at 250VDC, 160A,

Choose NH00 or NH000 fuses separately

Product measures 170mm H X 84mm WX 80mm D. Surface mountable.

25mm² cable - Per Meter

25mm² cable per meter,Class 6 multi-stranded extra flexible tinned copper conductor, 180A rated for 5mins @ 100% Duty cycle

Conductor diameter approx 6mm, Overall diameter includingsheath 10.5mm.

70mm² cable end lug, 8mm hole, heavy duty copper tube terminal

70mm squared cable end lug for crimping onto 95mm² multi-stranded battery cable. Heavy duty lug with flared cableentry. Tin plated copper. Made in the UK

125A fuse NH00, 250VDC for NH00 DC Fuse Disconnect

NH00high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

100A fuse NH000, 250VDC for NH00 DC Fuse Disconnect

NH00high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

6mm² flat pin lug, heavy duty tinned copper terminal

6mm squaredflat pin lug for crimping onto 6mm² multi-stranded battery or solar cable. Allows for neat and secure terminationof cable into screw terminalsin charge controllers or ourPV combiner boxes.Tin plated copper. Made in the UK

70mm² cable end lug, 10mm hole, heavy duty copper tube terminal

70mm squared cable end lug for crimping onto 95mm² multi-stranded battery cable. Heavy duty lug with flared cableentry. Tin plated copper. Made in the UK

25mm² cable end lug, 8mm hole, heavy duty copper tube terminal

25mm squared cable end lug for crimping onto 25mm² multi-stranded battery cable. Heavy duty lug with flared cableentry. Tin plated copper. Made in the UK

10mm² flat pin lug, heavy duty tinned copper terminal

10mm squaredflat reducing pin lug for crimping onto 10mm² multi-stranded battery or solar cable. Allows for neat and secure terminationof cable into screw terminalsin charge controllers or ourPV combiner boxes.Tin plated copper. Made in the UK

25mm² cable end lug, 10mm hole, heavy duty copper tube terminal

25mm squared cable end lug for crimping onto 25mm² multi-stranded battery cable. Heavy duty lug with flared cableentry. Tin plated copper. Made in the UK