About this item
FOXWELL T1000-Professional TPMS Relearn Tool with sensor activation and programming Why Monitor Tire Pressure? Tire Pressure Monitoring helps drivers to properly maintain their vehicle tires, improves vehicle safety and fuel efficiency. 33,000 crashes are a result of under-inflated tires. 75% of roadside flats are caused by a slow leak or under inflation. 35% of drivers admit to never checking tire pressure. NHTSA estimates TPMS could save as many as 660 lives annually. What will you do when you notice the illuminated TPMS warning light？ ✘ - Ignoring the warning light will cause you are risking tire failure or even serious injury. ✘ - Going to the workshops for a comprehensive check is effective, but it will cost more than your budget. ✔ - A FOXWELL T1000 costs little of the money to check TPMS in a workshop and it can perform the same professional functions as well. FOXWELL T1000- Professional TPMS Relearn Tool with sensor activation and programming-It's 2021 new generation FOXWELL TPMS service tool to activate OEM/Universal TPMS sensors, retrieve TPMS sensor data (sensor ID,tire pressure, temperature, battery condition and OE part number), relearn 98% sensor IDs, program FOXWELL T10-sensor to replace bad sensors and testing RF Remote Keyless Entry Key Fob.
Programming FOXWELL TPMS Sensors Note: This TPMS programming function can only work with FOXWELL T10 sensor. With this TPMS programming tool, you can program FOXWELL exclusive T10-sensor to meet the specifications of a particular vehicle before new sensor installation and relearn. Therefore, the healthy T10 Sensors can measure tire pressure and temperature accurately, allowing you to know tire health conditions, which can replace more than 95% of the original or OEM sensors. 3 different sensor programming methods are supported by This FOXWELL TPMS programming tool T1000: Copy by Activation; Manual Create; Automatic Create. (Note: T1000 only program a replacement sensor only if it is the FOXWELLT10 sensor.) Copy by Activation If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor. The Clone By Activation function lets users automatically write in the retrieved original sensor data to the FOXWELL Sensor which is used after the original sensor is triggered. 1)Highlight TPMS from the Main Menu and select the vehicle model as need. 2) Select Programming--Clone by Activation from the available menu. 3)Place the t1000 tool near the original sensor to be copied and press Activate to continue. 4)After trigger successfully, press Y to continue. 5)Place a new FOXWELL sensor near the TPMS tool (around 0-20 cm).6)Press Y to start the programming when the tool detect the sensor.7) Press N to exit after the programming successfully. Copy by Manual Input: If you know the original sensor ID, you could input the ID to program new sensor. The Manual Create function lets users to input the sensor ID manually. Input sensor ID. 1)Highlight TPMS from the Main Menu and select the vehicle model as need. 2)Select Programming--Manual Create from the available menu.3)Input the sensor ID in the dialog box and press Y to continue.4)Place a new FOXWELL sensor near the TPMS tool (around 0-20 cm).5)Press Y to start the programming when the tool detect the sensor.6)Press N to exit after the programming successfully. Auto Create 1-16 Sensors If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Intall new sensor ID--program new sensor-->perform tpms learning and let the car recognize new sensorAfter programming the new sensor, you need to perform tpms learning function to learn the new sensor ID to your car. The tpms learning method will vary on specific car models.(the car shown in our video is cadillac XT5, and it's using static learning method.) The tpms tool will show you what kind of learning method you car will apply. The Automatic Create function is to program FOXWELL sensors by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID.1) Highlight TPMS from the Main Menu and select the vehicle model as need.2) Select Programming--Automatic Create from the available menu.3) Place new FOXWELL sensors(1-16) near the TPMS tool (around 0-20 cm).4) Press Y to start the programming when the tool detect the sensor. 5) Press N to exit after the programming successfully. Note: T1000 only program a replacement sensor only if it is the FOXWELL brand.Almost all tpms programming tool in thie field have the same limitation. For example, if you purchase tpms programming tool from B brand, you should also purchase B brand sensor to peform this TPMS programming function Activate Almost All TPMS Sensors This FOXWELL TPMS scan tool T1000 enables you to activate 98% known OEM/Universal TPMS sensors in the market. You can rapidly and accurately trigger and decode sensors to read their ID, pressure, temperature, battery, frequency and OE Part number before servicing the tires/wheels or when you are performing programming or relearn. No need to purchase a separate activation tool. The sensor activation will be finished in seconds through two methods: in All wheel mode and in Single wheel mode. how to perform sensor activation function and how to read the OEM sensor information? Firstly, choose correct menu according to the car make/model/year and click menu "sensor activate". Then, put the T1000 tpms tool near to the tire sensor and click "trigger" button to begin the activation. Q: for example, if the car is 2017 Cadillac XT5, how can I locate the correct menu to perform sensor activation? A: choose "TPMS"---"USA"---"Cadillac"---"CT5"---> 2016/01-2021/06(433 MHz)(13598773) 2018/01-2021/12(433 MHz)(13516165) 2017/01-2019/12(315 MHz)(13589597) 2018/01-2020/06(315 MHz)(13516164) There are 4 menu options and how to choose the right one? Firstly, you could exclude two menus if you know your key fob frequency. For example, if your key fob frequency is 433 MHz, you could exclude the last two menu with 315 MHz, and the right menu will be located on the first two. Then you could try both first two menus with 433 MHz and see which one will work for your car. If you don't know the key fob frequency, you could also try all the four menus to see which one will work on your car. Tips: during the activation, remember to place the T1000 near the tire sensor or it will fail to receive the singal. If one menu option fails to work on your car, kindly try other menu options or contact for support. FOXWELL T 1000 three types of TPMS sensor relearn FOXWELL T1000 TPMS Relearn Tool can be served as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 99% vehicle with TPMS system and extremely popular among car repair ships and DIY car owners. To ensure T1000 compatible with different vehicles , 3 types for TPMS sensor relearning are offered : 1) self learning; 2) indirect learning; 3) static learning. These 3 learning methods will be easy to operate because the instructions of the scanner is fairly clear and intuitive. Self learning T1000 provides the easy relearn procedure instruction to simplify the auto-relearn process if your vehicle is able to learn single or multiple TPMS sensor IDs. For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Indirect learning This method can only be operated in the car. When you don't have a tire pressure sensore, our T1000 TPMS relearn tool will provides a learning method for customers to operate in the car to reset the tire pressure light. The learning method will vary from each vehicle. Static learning T1000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool T1000. Notice: 1.FOXWELL T1000 doesn't support OBD relearn.No OBD function. 2.If your old sensors are dead or cannot be scanned, this function may fail. 3.If you need to perform sensor cloning function, you should know your old sensor ID first. If no, you could use other scanner to scan the old sensor ID first, then use FOXWELL T1000 to perform sensor cloning.
Read TPMS Sensor Data Notice: There are lots of vehicles under each car brand and the compatibility for each vehicle will differ. Kindly send us YEAR and MODEL to check compatibility before the purchase. Kindly Noted: 1.FOXWELL T1000 doesn't support OBD relearn. No OBD function, NO OBD Diagnosis. 2. About TPMS programming function: T1000 only works with FOXWELL T10 sensor. Sensors from other brand is not available. 3.If you need to perform sensor cloning function, you should know your old sensor ID first. If no, you could use other scanner to scan the old sensor ID first, then use FOXWELL T1000 to perform sensor cloning. 4.There are lots of vehicles under each car brand and the compatibility for each vehicle will differ. Kindly send us YEAR and MODEL to check compatibility before the purchase. Foxwell T1000 Support Language: English,French,Spanish,Hungary,Germany,Italian,Portugue,Chinese. If no NEW language, please update it.  Specifications: Display: Backlit, 128*64 pixel display with contrast adjustment Operating Temperature: 0 to 60°C (32 to 140°F) Storage Temperature: -20 to 70°C (-4 to 158°F) Power: 3.7V Li-polymer battery Radio Reception: 315 MHz and 433.92 MHz Dimensions: 200*100*38mm (L*W*H) Package includes: 1PC x T1000 Main Unit 1PC x User's Guide 1PC x USB Mini Cable 1PC x Magnet 1PC x Battery Charger 1PC x Carton |
