• Product Feature:
  •  
  • * Fitment: Compatible with GM Duramax 6.6L engines 2005-2011. Replace to 6779 and similar to J-46594.
  •  
  • * Upgrade Design: Safely pulls the injectors from the cylinder heads without pulling the injector cups and without causing damage to the injector body.
  •  
  • * Material: Advanced heavy duty steel with black oxide finish, durability, impact and wear resistance, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.
  •  

    • Wish-auto

    6779 Injector Puller for GM Duramax 6.6L Engine 2005~2011 Replaces OTC 6779/Kent Moore J-46594 Heavy Duty Steel (Black)

    Product Feature:

     

    * Fitment: Compatible with GM Duramax 6.6L engines 2005-2011. Replace to 6779 and similar to J-46594.

     

    * Upgrade Design: Safely pulls the injectors from the cylinder heads without pulling the injector cups and without causing damage to the injector body.

     

    * Material: Advanced heavy duty steel with black oxide finish, durability, impact and wear resistance, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.

     

    * Easier Work: Simply insert the tool into the injector fixing bracket bolt hole. Attach a socket and ratchet/ breaker bar to one of the hex heads, and start to rock back and forth, then the injector will pop out.

     

    Product Description:

     

    6779 injector puller is made of quality heavy duty steel, high precision and high hardness. Easy pulls the injector from the cylinder head without pulling the injector cups and without damaging the injector body.


    Easy Installation:


    Step 1: Disconnect the fuel injector electrical connectors.
    Step 2: To assist with disassemble the fuel injector pipes, apply lithium grease between the fuel injection pipe and the accessories.
    Step 3: Disconnect and reposition the fuel return pipes.
    Step 4: Remove the fuel injector bracket bolts.
    Step 5: Install the 6779 injector puller into the bolt hole of the fuel injector bracket.
    Step 6: Install a wrench onto the 6779 injector puller. Turn the wrench away from the injector until the injector loosens from its base.
    Step 7: Remove the 6779 injector puller and install on another injector. Repeat steps 5-7.
    Step 8: Reinstall the fuel injector bracket bolts and return pipes. Reconnect each injector electrical connectors. (To prevent possible severe damage to the engine, please make sure the injector electrical connectors are connected correctly.)

     

    Package Details:

     

    1 x Injector Puller 


    Item Specifics
    Brand WI-Auto
    Manufacturer Part Number WIQP901
    Type Injector Puller
    Warranty 1 Year
    Color Black
    Fitment For GM Duramax 6.6L Engine 2005-2011
    Sub-Type Injector Puller Automotive Tool
    Set or Single Item Single Item
    Material Steel
    Surface Finish Black Oxide
    Number of Pieces 1

    Payment

    ★. We accept payment via payoneer, paypal, credit card, debit card 

          and many other mothods.

    ★. S&H will be determined based upon the SHIP TO address.

    ★. Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.

    Shipping

    ★.Items will be shipped within 1-2 business day when we received payment.

    ★.We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

    Returns

    ★.We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

    ★.Leave a message note in returned box quoting your item(s) ID and buyer ID.

    ★.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

    ★.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

    ★.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return

    Contact Us

    ★.Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.

    We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

    ★.We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.

    ★.pls contact me first before you leave Neutral or Negative feedback. i will do my best to solve the problem, thanks!

    Any question,please don't hesitate to contact us by the ebay message.

    Wish-auto

    Shop Category
     Store Home
     ATV Tools
     Boats Accessories
     BMW Tools
     Cummins Tools
     Cat Cater pillar Tools
     Chevy Chevrolet / Buick Tools
     Detroit Diesel
     Duramax Tools
     Ducati Tools
     Ford Tools
     GM Tools
     Dodge / Chrysler / Jeep
     Dana Tools
     Volvo Tools
     Polaris Tools
     Toyota / lexus / Nissan Tools
     Honda / Yamaha Tools
     Hummer Tools
     John Deere Tools
     Other
     Other
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    6779 Injector Puller for GM Duramax 6.6L Engine 2005~2011 Replaces OTC 6779/Kent Moore J-46594 Heavy Duty Steel (Black)

    Product Feature:

     

    * Fitment: Compatible with GM Duramax 6.6L engines 2005-2011. Replace to 6779 and similar to J-46594.

     

    * Upgrade Design: Safely pulls the injectors from the cylinder heads without pulling the injector cups and without causing damage to the injector body.

     

    * Material: Advanced heavy duty steel with black oxide finish, durability, impact and wear resistance, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.

     

    * Easier Work: Simply insert the tool into the injector fixing bracket bolt hole. Attach a socket and ratchet/ breaker bar to one of the hex heads, and start to rock back and forth, then the injector will pop out.

     

    Product Description:

     

    6779 injector puller is made of quality heavy duty steel, high precision and high hardness. Easy pulls the injector from the cylinder head without pulling the injector cups and without damaging the injector body.


    Easy Installation:


    Step 1: Disconnect the fuel injector electrical connectors.
    Step 2: To assist with disassemble the fuel injector pipes, apply lithium grease between the fuel injection pipe and the accessories.
    Step 3: Disconnect and reposition the fuel return pipes.
    Step 4: Remove the fuel injector bracket bolts.
    Step 5: Install the 6779 injector puller into the bolt hole of the fuel injector bracket.
    Step 6: Install a wrench onto the 6779 injector puller. Turn the wrench away from the injector until the injector loosens from its base.
    Step 7: Remove the 6779 injector puller and install on another injector. Repeat steps 5-7.
    Step 8: Reinstall the fuel injector bracket bolts and return pipes. Reconnect each injector electrical connectors. (To prevent possible severe damage to the engine, please make sure the injector electrical connectors are connected correctly.)

     

    Package Details:

     

    1 x Injector Puller 



    ★. We accept payment via payoneer, paypal, credit card, debit card 

          and many other mothods.

    ★. S&H will be determined based upon the SHIP TO address.

    ★. Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.

    ★.Items will be shipped within 1-2 business day when we received payment.

    ★.We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

    ★.We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

    ★.Leave a message note in returned box quoting your item(s) ID and buyer ID.

    ★.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

    ★.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

    ★.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return

    ★.Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.

    We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

    ★.We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.

    ★.pls contact me first before you leave Neutral or Negative feedback. i will do my best to solve the problem, thanks!

    Any question,please don't hesitate to contact us by the ebay message.


    All rights reserved.