CISCO C886VA-K9 4-port 10-/100-Mbps Managed Switch

Brand New

Description

Communications

Digital Signaling Protocol:

ADSL2+ over ISDN, VDSL2 over ISDN

Protocols & Specifications:

ITU G.991.2 (G.shdsl), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M

Type:

ISDN / DSL modem combo

Dimensions & Weight

Depth:

26.4 cm

Height:

4.4 cm

Weight:

2.5 kg

Width:

32.5 cm

Environmental Parameters

Humidity Range Operating:

10 - 85% (non-condensing)

Max Operating Temperature:

40 °C

Min Operating Temperature:

0 °C

Expansion / Connectivity

Interfaces:

LAN: 2 x 10Base-T/100Base-TX - RJ-45 ¦ LAN: 2 x 10Base-T/100Base-TX (PoE) - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST ¦ Management: 1 x console - RJ-45

General

Authentication Method:

RADIUS, TACACS+, Extensible Authentication Protocol (EAP)

Capacity:

Concurrent IPSec tunnels: 20 ¦ Maximum number of configured SSIDs: 16 ¦ Wireless VLANs: 8

Compliant Standards:

IEEE 802.1D, IEEE 802.1Q, ANSI T1.413, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), CISPR 24, EN55022, CISPR 22, EN50082-1, EN55022 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, IPv6 Ready, EN 61000-3-2:2000, EN 61000-3.3:1995 + A1:2001, KN22, EN55024:1998 + A1 + A2, EN 50082-1:1997, EN 300386

Connectivity Technology:

Wireless, wired

Data Link Protocol:

Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)

Device Type:

Router - 4-port switch (integrated)

Enclosure Type:

Desktop

Encryption Algorithm:

LEAP, DES, Triple DES, SSL, PEAP, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP

Features:

Firewall protection, NAT support, MDI/MDI-X switch, power over Ethernet (PoE), VLAN support, content filtering, DiffServ support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), MIMO technology, Virtual Route Redundancy Protocol (VRRP) support, WLAN controller mode, Asynchronous Transfer Mode (ATM), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy, wireless bridge mode, Bidirectional Forwarding Detection (BFD), DHCP relay, Port Security, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Ingress Layer 2 MAC Access Control Lists (ACLs), VPN Server, Call Admission Control (CAC), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support

Flash Memory:

256 MB

Frequency Band:

2.4 GHz

Network / Transport Protocol:

L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, RTP

RAM:

256 MB

Remote Management Protocol:

Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI

Routing Protocol:

OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)

Status Indicators:

Port status

Line Properties

Framing Format:

ANSI T1.413

Power

Power Device:

External power adapter - 60 Watt Euro Plug

Voltage Required:

AC 120/230 V (50/60 Hz)

Software / System Requirements

OS Provided:

Cisco IOS Advanced IP services