- Specification:Condition: 100% Brand New
Opreating Voltage: 110-240V/50-60Hz
Detection Range:120° (side-view) /360°（top-view)
Detection Distance:Max.6m
Detection Speed:0.6-1.5m/s
Load Power: Max.800W(-110V AC) / Max.1200W(-220V AC)
Working Temperature: -20~+40℃
Working Temperature: -20~+40℃
Delay Time: Min.5seconds - Max.7minutes
Environment Humidity:Max.93%
Ambient Light:<10Lux
Installation Height:2m-4.5m
- Caution
Before installation ,please read instruction carefully and preserve it well
Only maintained and installed by qualified electrician
Keep away the heating/streaming/air conditioning devices
Don't impact the lens with any object
- Installaion
Switch off the power
Turn clockwise the bottom-stand and take off it .The power wire cross the hole in the middle of bottom-stand.
The bottom-stand is fixed on the selected position with inflated screw
Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram
The sensor aimed at the mouth of bottom-stand and turned anti-clockwise
- Operation
1.Detection-angle /Detection-distance /Installation-height
a.detection angle is 120°(side-view) and 360°(top-view)
b.detection-distance is max.6m and installation-height is max.4.5m
2.You can adjust distance detection (SENS)/time delay(TIME)/ambient light(LUX) using adjustment knobs
a.To adjust distance detection to a high level please turn the adjustment knob clockwise.Max.detectable distance is approx.6m.
b.Time delay is adjustable from 5 sec to 7 min(+/-10%).To increase time delay, please turn the adjustment knob clockwise.
c.Ambient light sensitivity level is adjustable between 5-1000 LUX.To use sensor in daylight conditions please turn the adjustment knob counterclickwise. In poor illuminated environment adjust the appliance by turning the knob clockwise.
- Package included
1x 360° Infrared Motion Sensor
