Evans Engine coolant
Power cool 180 bottles

Aero Cool 180°

Waterless Engine Coolant for Aircraft

Aero Cool 180° is the specified coolant of choice for manufacturers such as Rotax and EMT GmbH.

No Water

Aero Cool 180° contains no water eliminating the problems caused by water based coolants, increasing reliability and extending engine life.

Long Life

Aero Cool 180° has been proven to last more than 20 years and a million miles in service without the need for replacement.

Protection

Aero Cool 180° reduces cavitation erosion by 75% compared with water based coolants and eliminates oxidation corrosion.

-40°c to +180°c

Aero Cool 180° has a boiling point above 180°c eliminating the risk of overheating and boil-over associated to water based coolants.

Low Pressure

Aero Cool 180° generates 75% less vapour pressure than water based coolants, significantly reducing strain on hoses, seals and gaskets.

Non Toxic

Aero Cool 180° has been tested and certified as Non Toxic by an EPA approved laboratory. It is biodegradable and will not bio-accumulate.

Application

For aero engines fabricated from a mixture of cast iron, copper, steel and aluminium components

Typical Characteristics

Physical State : Low Viscosity Synthetic Liquid
Boiling Point : Above 180°C
Freezing Point : Below -40°C
Colour : Yellow Clear
Odour : Almost odourless
Taste : Slightly Sweet, Non-Toxic but not recommended for human consumption

ASTM & ISO Standards

Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards.

Prep Fluid

Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

Evans prep fluid is used to :
  1. Hygroscopically absorbs water
  2. Ensures all residual water is removed from the system
  3. Ensures that Evans coolants will meet the water content limits and provide peak performance

Additional products within the Evans product range include...

prep evans bottle
vinatge evans bottle
auto evans bottle
power sportsevans bottle
power cool evans bottle
marine cool 180
classic evans bottle
power sportsR evans bottle
aerocool 180
2L and 5L Listings Link Here
25L Listings Link Here
Aero Cool 180° contains no water eliminating the problems caused by water based coolants, increasing reliability and extending engine life. Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards. Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush o