Eibach Pro-Kit Lowering Springs Kit E10-84-010-03-22 for VOLVO S80 II (AS)

LIST OF COMPATIBLE VEHICLES & PRODUCT SPECIFICATIONS:

• If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.
• The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter "K" in your vehicle registration certificate or to find at the type plate of your car!)
• Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de
• In case of non-conformance the items must not be fitted – please refer to your dealer.
• Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.
• Mounting position - you can "read" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.
• Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required.
• Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.
• The installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8
• Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.
• Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
• The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
• If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.

• 18 - Without levelling control.

• “Main Technical Notes” apply fully to every compatible vehicle. “Additional Technical Notes” apply to certain compatible vehicles according to the numbers pointed for every vehicle in the “List Of Compatible Vehicles & Product Specifications” section.
• If you have any doubts when choosing a product, TrendTrade specialists will be happy to answer any questions and advise the best solution. If you need to consult whether a given product fits your vehicle, please provide the following information about the car: Brand, Model, Engine type, Year of production, Body type, Drive type (front / rear / 4x4), Maximum axle loads (on the vehicle nameplate), Vehicle approval certificate number (on the vehicle nameplate). This information enables our specialists to verify that the product fits your car and ensure that it is TUV and/or ABE certified for your vehicle.
• If you have doubts about the product's compatibility with your vehicle after receiving your order, please do not install it in your car and contact your seller immediately. Products showing signs of use cannot be returned due to road safety reasons, which exclude the possibility of re-selling them to another customer as reliable products.
• The offer contains illustrative photos from the manufacturer's catalog, individual references may visually differ slightly in reality.

• The Eibach Pro-Kit is the perfect answer for most popular street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance. Pro-Kit lowers your car’s centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking.
• When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs.
• Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality.
• By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

World‘s leading Performance Suspension Spring System, Lower vehicle, Lower car center of gravity, Reduce excessive fender well clearance, Performance handling, Progressive spring design, Improve car performance and appearance, Reduce squat during acceleration, Reduce body roll in corners, Reduce nosedive under braking, German quality, World‘s leading producer