Modernize with this accurate digital clock featuring self setting atomic time and automatic daylight saving time resets. 7 time zone settings from continental United States. Be ready for the weather with included wireless outdoor transmitting temperature sensor. Displays indoor & outdoor temps with trending arrows showing you if weather will improve or not. Low battery icon indicates if batteries need replacing.
Below Proper start up:
Good fresh batteries are important for best performance in your sensor and as backup in your clock.
- Batteries are manufactured 10 years in advance of the date on the battery.
- We recommend batteries with an expiration date no more than 6 years in advance of the current year for best performance.
- A minimum voltage of 1.48 v per battery is required for best performance.
- Lithium batteries may be used in outdoor sensor. Alkaline batteries for your clock.
To set up clock:
- Install batteries into your sensor.
- Install batteries into your clock.
- Let sensor and clock sit within 10 feet of each other for several minutes to lock the sensor signals to the display
Note - MOUNTING: WHERE DO I MOUNT/POSITION MY SENSOR?
Place your temperature sensor at least 6 feet off the ground.
- For accurate temperature readings your sensor needs to be shaded from the sun in a well vented area.
- Mount your sensor vertically to allow moisture to drain out the bottom.
- Preferred location is on a north facing wall under an eave or deck rail.
- Avoid placing near a metal roof that will cause it to read high on sunny days.
- Avoid other sources of heat such as soffit vents, and window or door frames.
- For accurate humidity readings, avoid placement near vegetation and lakes or other bodies of water when possible.
- Place your sensor in a well-vented area. Trapped moisture will cause inaccurate readings.
- Maximum transmission distance from your thermos-hygro sensor to your clock, in open air is 300 feet (91 meters).