12V DC Power Supply 50A 600W Regulated Switch Power Transformer AC 110V 220V to DC 12 Volt 50amp 48A 45A 42A 40A Converter Adapter LED Driver 3 Output Port for LED Light 3D Printer CCTV


  • Universal Switching Mode Power Supply Input: AC 110V / 220V, 50 / 60Hz ; Output: DC 12V, Max 50A 600W. Three output ports. Each port outputs 0~50A automatically to match your device, 50A max in total for 3 ports. The default output voltage is 12V, but it can be regulated by 10%, from 10.8V to 13.2V.
  • It can supply with all currents less than 50A, such as 5A, 10A, 15A, 20A, 30A, 40A, 42A, 45A, 48A, 50A. For example, if your device draws 35A, then 35A will be supplied. If draws more than 50A, only 50A will be supplied and power supply will be damaged soon. NEVER OVERLOAD !
  • Certified by FCC CE ROHS: Automatically over-current cut-off, over-voltage cut-off, over -temperature cut-off, short circuit protection. Low noise, no spontaneous combustion, no explosion, no fire hazard, stable output, safe to use.
  • It is widely use to driving 12V LED strip light, flood light, commercial lighting project, wireless router, ADSL cats, HUB, home security cameras, audio/ video devices, 3D printer, CCTV DVR NVR Surveillance System, LCD/LED monitor screen, webcam router, speaker or other 12V devices less than 600W.
  • Considering large power and safety, built-in a cooling fan to improve heat dissipation efficiency. The fan will keep running all the time once it is powered. 

Parameters:
  • Input: AC 110V/220V, 50/60Hz
  • Output Voltage: DC 12V ( Regulated by 10% )
  • Output Current: Max 50A
  • Output Wattage: Max 600W
  • Size: 9.5in (24.2cm) x 5.1in (13cm) x 2.7in(6.8cm)
  • Material: aluminum, electronic components
  • Safety Compliance: FCC / CE/ RoHS
  • Fix Screw Hole Diameter: 2.5mm (0.1inch)
  • Working temperature: -10°C to 60 °C
  • Environmental humidity: 10%-95%
  • Weight: 3.7 lbs / 1660g

Package includes:
  • 1x 12V 50A power supply (power cord is not included)

Please Note:
1. 110V/220V must be selected by switch before using to avoid damaging. Please change the switch to 110V for USA
2. It comes without installation instruction, power cord, on/off switch and screws. Professional installation of licensed electrician is highly recommended
3. High voltage inside, NEVER remove the cover. Not waterproof, indoor use only
4. Make sure your device match the 12V voltage and wattage less than 600W. Please don’t run it overload

Connection Instructions:
L: AC Live Wire
N: AC Neutral wire
〨: Ground
+V:DC 12V+
COM: DC 12V-
+V ADJ: Adjust output voltage by 10%

Advice:
  • The max use should be no more than 80% of the full loads
  • Otherwise, the service life of the power supply will be greatly shortened
  • We recommend you to use this 12V 50A 600W power supply to power devices less than 480W