LNB PLL LO 12.80 is Low Noise Block Down Converter which is designed for RF signals gaining and transforming from Ku-band to L-band (intermediate frequencies). The LNB PLL LO 12.80 has a waterproof case. LNB PLL LO 12.80 can be mounted in close proximity to antenna. LNB parameters correspond to MVDS / MITRIS TV broadcasting systems conditions in accordance with DVB-S/S2 or DVB-C standard and can be operated up to 25 carriers. LNB PLL LO 12.80 has input flange of PBR120 type and can be used with regular RRL or receive antennas.
LO: 12.80 GHz IN: 13.75 - 14.75 GHz OUT: 950 - 1950 MHz
KEY FEATURES:
Input parameters: | |
---|---|
Input Frequency range | 13.75 - 14.75 GHz |
Input level, max | -57 dBm |
Input VSWR, max | 2.0 |
Input interface | Waveguide WR75, Flange PBR120 |
Local Oscilator: | |
LO frequency | 12.80 GHz |
LO Phase noise: | |
@1 kHz | -75 dBc/Hz |
@10 kHz | -85 dBc/Hz |
@100 kHz | -95 dBc/Hz |
LO instability | ± 150 kHz |
Output parameters: | |
Output frequency range | 950 - 1950 (or by order) |
Output Power @P1dB | +3 dBm |
Gain, min | 45 dB |
Output interface | F-type female |
Output impedance | 75 Ohm |
Output VSWR, max | 2.5 |
Frequency Response: | |
Flatness over Full Band | ±2 dB |
Flatness over 27MHz Band | ±0.75 dB |
Spurious: | |
Noise Figure (@+25℃) | 0.9 dB max |
LO leakage, max | -45 dBm |
Image rejection, min | 45 dBc |
Power supply: | |
Input voltage | 12 VDC – 24 VDC, nominal 18 VDC |
Power consumption, max | 5.25 W |
Environmental: | |
Operating temperature | -30℃ to +60℃ (-22℉ to +140℉) |
Storage temperature | -40℃ to +80℃ (-40℉ to +176℉) |
Operating humidity | 0% - 95% |
Mechanical: | |
Dimensions (W x H x D) | 60x42x126 mm |
Weight | 0.4 kg |