Specification:

• Brand new

• Materials:aluminum alloy

• Color:white

• Bracket Diameter(approx.):25mm

• Applicable Curtain Type:all apply

• Input:AC 100-240V

• Output:DC 24V

• Current:1.2A

• Torque:1.2Nm

• Rotate Speed:30rpm

• Frequency:433.92MHz

• Body size: Approx. 45cm long 25mm diameter            

• Power cord type: 3 core

• Maximum running time: 30 minutes

• Operating noise: <30db

• Max. load : 6.5KG                 

• Power : 45W

• Power cord length: approx. 130cm                                

• Rated voltage input: AC100-240V                          

• Rated torque: 1.2N

• Rated current : 1.2A

• Box size : 48.5cm*10cm*5cm 

• Product color: White

• Rated torque: 1.2N.m

• Rated speed:30rpm

• Outer tube diameter:25mm

• Outer tube length:415mm

• Rated voltage:100-240V

• Rated power:36W

• Protection grade:IP44

  Remote Control Battery Type:2 xAAA
  

• Sensor short circuit and open circuit protection function.

• The motor is running to block the automatic protection stop.

• It is easy to switch the jog / interlock state and the running direction of the motor.

• Up to 6 limit points (upper / lower limit and 4 intermediate positions) can be set.

• The displacement generated during the motor braking process can be automatically corrected.

• Power and automatically save the location and function parameters.

• Direct detection of the number of turns of the motor, high positioning accuracy.

• Built-in superheterodyne receiver module, receiving sensitivity -110dBm.

Package Included:

• 1 x electric shutter motor(Button Battery included)
  

• 1 x remote transmitter
  

• 3 x accessories
  

• (Distribute the adapter according to your country)

Note:

• Install motor terminal on the same side as power supply.

• Terminal of motor with "Setting" key on the motor should face forward you.

• Tighten brackets until the motor is horizontal.

• Please replace the battery in time when the remote transmitter indicator does not shine or the remote-controlling distance evidently become shorter.

• Please take out the battery if the remote transmitter will not be used for a long time.

• Antenna shall be as straight as possible with position far away from metal objects.Directly contact to metal objects is prohibited;otherwise,the receiving distance will be influenced seriously.