roVa Shield Aerogel Insulation Coating, HT 

4.8 Gallon (18 Liters)


The Ultimate Aerogel Insulation Coating, for Higher Temperatures


roVa Shield Black HT extends the operating temperature range to +356°F (+180°C), making it more suitable for industrial application where higher temperature tolerance is required.


Details:

•EASY - White color paint that can be easily applied using ordinary paint equipment.


•ENERGY SAVINGS - Save energy through its excellent thermal insulation properties, utilizing the low thermal conductivity of aerogel. Operating temperature range from -58F to +356F (-50C ~ +180C).


•REDUCE COST - Lower energy cost by improving energy efficiency of architectural buildings.


•ENVIRONMENTAL - Does not contain dangerous chemicals, VOC, or bad odor. Prevents condensation.


•SOUND DAMPENING - Lower sound and vibration in noisy engine rooms and chambers in aviation, shipping, and automotive vehicles.



Technical Features:
CategoryFeature
Coating TypeWater-based Acrylic
ColorWhite
Size4L, 18L
(1.05, 4.76 Gallon)
Density0.55 ~ 0.58 g/cm3
Viscosity20,000 ~ 25,000 cPs
Application MethodBrush, Roller, Airless Sprayer
Theoretical coverage0.62 m2/L (1.0 mm thickness)
25 sq.ft./gallon (0.04″ thickness)
Solids by Volume62%
Application Thickness1.0 mm (3 ~ 4 coats)
0.04″ (3 ~ 4 coats)
40 mils (3 ~ 4 coats)
Dry to touch time3 ~ 4 hours (25°C, 77°F, 50% humidity, Brush)
Cure time60 hours (25°C, 77°F, Brush, 0.5 mm, 0.02″ thickness)
Storage12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%)
Thermal Conductivity0.040 ~ 0.045W/m·k
Application Temperature10 ~ 80°C
50 ~ 176°F
Operation Temperature-50 ~ 180°C
-58 ~ 356°F

Sprayer Parameters:

CategoryAir Spray Gun
Tip Size2.5 mm
Pressure5~6 bar
Thickness per coat300~350𝜇𝑚
Recoat time4 hours
Dilution(wt%)30%

CategoryMortar Sprayer
Tip Size4~6Φ
Pressure6~8 bar

CategoryAirless Sprayer
Tip Size419~435
Pressure60~80 bar

CategoryMortar Sprayer and Airless Sprayer
Thickness per coat800𝜇𝑚 (2 coats, 10% dilution) ~ 1,500𝜇𝑚 (single coat)
Recoat time8 hours (800𝜇𝑚 thickness per coat)
Dilution(wt%)None, recommended. (Only if necessary, up to 10%)