Xilinx Kintex-7 FPGA board EDX-009-70T
Description
USB3.0 compatible educational boardKINTEX-7 USB-FPGA boardEDX-009-70T Rev. 2Made by human dataI purchased a new one in 2020, but I will exhibit it because there was no opportunity to use it.It is unopened in the inner bag.XILINX KINTEX-7 XC7K70T-1FBG484C installed■ PC and USB communication are possible with USB port, USB3.0 compatible by FT600■ PC and USB communication are possible with USB port, USB2.0 compatible by FT232H■ FPGA configuration via USBConfiguration is possible via JTAG■ External drawer of abundant I/O (100)CNA: 50 (HIGH RANGE) VCCO = 3.3VCNB: 50 (HIGH RANGE) VCCO = 3.3V (external input is possible)■ Onboard clockGeneral -purpose: 50MHz (LVTTL), 200MHz (LVDS)External input (CNA/CNB)■ Equipped with DDR3SDRAM (Micron, 1Gbit)(Equipped with large -capacity devices: Custom -made)■ Configuration ROMRev3 Quad Spi ROM: MT25QL128 (Micron, 128Mbit)Rev2 Quad Spi ROM: N25Q128 (Micron, 128Mbit)ISP possible from IMPACT■ External DC5V or 3.3V operation (not operating only with USB cable)Onboard 1.0V, 1.5V, 1.8V, 3.3V power supplyEquipped with a power sequencer (at the time of launch)■ Resources reset circuit for configuration■ 7 -pin JTAG connector■ Status LED (Power, Done)■ General -purpose LED X2■ General -purpose switch x2Push button switch x1DIP Switch X1bit■ Adopt 8 -layer boards■ Credit card sizeSame size as the XCM-0xx series, the same pin layout54mm x 86mm (including protrusions)