Extremely long service life
Excellent flexibility for dynamic joint movement
Bonds to most substrates without priming
Ready to use, no mixing required
AAMA Certified component for window backbedding / glazing
All season ease of application
Fungicide additive for mildew resistance
Sikasil NPlus: Black RTV Silicone 10.1oz Tube
Sikasil NPlus US is a general purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Sikasil NPlus meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB- 19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content. Areas of use for Sikasil NPlus are window and door fabrication conventional glazing back bedding and cap, toe and heel beads, perimeter sealing of windows, doors and skylights, expansion and control joints, HVAC, white goods assembly kitchen and bath countertops/solid surfaces, sanitary seals.
Expansion Joints- The minimum width and depth of any sealant application should be 1/4″ x 1/4″ (6 mm x 6 mm). The depth (D) of sealant may be equal to width (W) of joints less than 1/2″ wide. For joints from 1/2″ to 1″ (13 mm to 25 mm) wide, the sealant depth should be approximately one-half of the joint width. The maximum depth (D) of any sealant application should be 1/2″ (13 mm). For Joints that are wider than 1″ (25 mm) contact Tremco Technical Services or your local Tremco Sales Representative.
Window Perimeter- For fillet beads, or angle beads around windows and doors, the sealant should exhibit a minimum surface contact area [C] of 1/4″ (6 mm) onto each substrate, with provisions for release at the heel of the angle using backer rod or bond breaker tape