HPE Aruba AP-225 Wireless Access Point 802.11a Wi-Fi APIN0225 JW175A

Condition: Refurbished
Compeve SKU: 460100102213

AP-225 and IAP-225

2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional downtilt antennas

Wireless Radio Specifications

AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n

In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.

Software-configurable dual radio supports 5 GHz and 2.4 GHz

3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate

Supported frequency band (country-specific restrictions apply):

2.4000 GHz to 2.4835 GHz

5.150 to 5.250 GHz

5.250 to 5.350 GHz

5.470 to 5.725 GHz

5.725 to 5.850 GHz

Available channels: Dependent upon configured regulatory domain

Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

802.11n/ac: 3×3 MIMO with up to three spatial streams

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

2.4-GHz band: +23 dBm

5-GHz bands: +23 dBm

Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems

Maximum ratio combining (MRC) for improved receiver performance

Cyclic delay diversity (CDD) for improved downlink RF performance

Short guard interval for 20-MHz, 40-MHz and 80-MHz channels

Space-time block coding (STBC) for increased range and improved reception

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

Transmit beam-forming (TxBF) for increased reliability in signal delivery

Supported data rates (Mbps):

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 450 (MCS0 to MCS23)

802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)

802.11n high-throughput (HT) support: HT 20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80

802.11n/ac packet aggregation: A-MPDU, A-MSDU

Antennas

AP-224: Three RP-SMA connectors for external dual-band antennas

AP-225: Six integrated down-tilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225.

Other Interfaces

Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

Auto-sensing link speed and MDI/MDX

PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+

DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5 mm length

USB 2.0 port (Type A connector)

Serial console interface (RJ-45, TTL levels)

Visual indicators (LEDs):

Power/system status

Ethernet link status (2x; ENET0, ENET1)

Radio status (2x; RAD0, RAD1)

Kensington security slot

Reset button

Power

Worst-case power consumption from the AP (excluding power drawn by an attached USB device):

In restricted mode (PoE): 13.5 watts

In unrestricted mode (PoE): 17 watts

In unrestricted mode (DC): 15.5 watts

Power sources sold separately

Direct DC source: 12 Vdc nominal, +/- 5%

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

Efficient mode PoE – power save with 802.3af PoE and limited functionality on 2.4 GHz

USB port disabled

Second Ethernet port disabled

2.4-GHz 802.11n radio in 1×3:1SS mode

Unrestricted functionality with 802.3at PoE+

Mounting

Included with AP:

Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

Optional mounting kits:

AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails.

AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket.

AP-220-MNT-W2: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle

Mechanical

Dimensions/weight (unit, excluding mount accessories):

203 mm (W) x 203 mm (D) x 54 mm (H), 8.0” (W) x 8.0” (D) x 2.1” (H)

750 g/27 oz

Dimensions/weight (shipping):

315 mm (W) x 265 mm (D) x 100 mm (H), 12.4” (W) x 10.4” (D) x 3.9” (H)

1,250 g/44 oz

Environmental

Operating:

Temperature: 0° C to +50° C (+32° F to +122° F)

Humidity: 5% to 95% non-condensing

Storage and transportation temperature range:

Temperature: -40° C to +70° C (-40° F to +158° F)

Compeve DTP#: mrk001

PAYMENT

SHIPPING

We process and ship all orders from our Elmhurst IL USA HQ. Orders placed Monday through Friday (excluding national holidays) will be processed and shipped within 1 business day once credit card authorization and verification have been obtained.
Orders placed on Saturdays and Sundays will begin processing the following business day (excluding national holidays).
All orders placed after 2 PM CST will begin processing the next business day.
If you are located outside the continental USA (HI, AK, PR and other) - please contact us prior to ordering to obtain an accurate shipping quote.
You will be contacted by one of our customer care representatives if any kind of problem has incurred with your order or payment.
In the event of merchandise damage or loss during transit, it is your responsibility to file a claim with the carrier.
If you refuse any shipments from Compeve_corp, you are responsible for the original shipping charges, any duties, taxes, and/or customs charges that are incurred on the package, and the cost of returning the package to us.
This amount will be deducted from your refund.

INTERNATIONAL

RETURNS/REFUNDS

1. If you are not satisfied with compeve_corp services and products you can cancel your order or return merchandise asking for a replacement/refund within 30 days of receipt of shipment.
2. Before you send any equipment to compeve_corp, please contact us with your order number and we will provide you with instruction about the process.
3. Products must be sent back within 14 days after contacting us. All returns will be tested. In some cases return for refund found to be non-defective, may result in a 20% restocking fee. Buyer pays return shipping for all non defective products. Any product found to be damaged through misuse, abuse or negligence is not eligible for warranty replacement.
4. There are no returns for retail packaging processors, printers, memory, LCD monitors and TV's for repair or refund. Customers agree that these items can only be returned to manufacturers for replacement/repair except in cases of shipping wrong item or clear shipping damage. No exceptions.
5. Refund requests are resolved within 14 days after receiving the product. Shipping cost is not refundable.
6. If you have any questions or inquiries concerning return and refund policy, please write us email.
7. In the case of any product(s) returned for any reason, returned item(s) must be 100% complete, in original condition, with all packaging, manuals, registration card(s), accessories, cables and software.
8. We reserve the right to refuse a return on any product that does not meet these requirements.
9. Shipping and Handling fees are not refundable, with the exception of orders incorrectly shipped by compeve_corp.