- Condition: 100% new
- Color: Black
- Material: Silicone Rubber & Metal
- Size: As picture shows
- OBD Interface: EOBD, OBDII
- Type: Intake Pipeline Smoke Leak Detector
- Item included: 1 x Intake Bladder
- Compatible With: fit for Universal
-
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) This airbag is suitable for 4cm-10cm air inlet.
Product Dimension:
Feature:
1) 100% new with good quality.
2) Universal intake Adapter.
3) 100% fit all cars and light trucks.
4) Quick seal intake/exhaust easily.
5) Reduce workload in a leak check.
6) Fits any shape of intake/exhaust:round,oval,square,rectangular and even severelly angled and hard to reach intake/exhaust systems.
7) Work with any brand of smoke machine or diagnostic leak detectors.
Quick Start Instruction:
1. Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed,so as not to scratch the adapter.
2. Close the Pressure Relief Valve(A) next to the Hand Pump(B).
3. Put the Rubber Component(C) into the intake opening.
4. Inflate the Rubeber Component(C) by pressing the Hand Punm(B) till the intake opening is tightli sealed.
5. Now the system is ready to test,introduce air/smoke into the system by plug the smoke nozzle into the Tube Opening(D).
6. After test,pull off the smoke nozzle,release the inflated air by open the Pressure Relief Valve(A) next to the Hand Pump(B).
7. Clean the adapter for storage,avoid contact with corrosive liquids.
