This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick?) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading &Down-Loading. Extension of file name supports: *.?NC, *.TXT,*.NC, *tap
Replace PC running to DNC software
NOTE: This is the basic device, there is no internal memory and you can only use the program copied from a USB memory stick
If you need a device with 4GB internal memory, you can choose DNC TITAN from our store (https://www.ebay.com/str/dnccnc)
function
transfer program into CNC machine memory
transmit DNC drip program (works in TAPE mode)
receive program or PC / PARAMETER from CNC machine
has RS232 DP9 communication port and
parallel port (FANUC 50pins)SPECIAL FUNCTION: drip feed program to fanuc 6M CNC machine via 50-pin parallel port. in TAPE mode (DNC)
There are 4 rear mounted magnets of the device that make it easy to put DNC on CNC machines
Reads USB 2.0, SD card CARD of all brands and various capacities.
Reading is the long file names up to 255 characters
Automatic return to the first file after the transmitting completely
Skip Xon
Select the files you want to transfer in a list displayed on the LCD screen
Set the function and parameters with the button, displayed directly on the LCD
Speed baudrate up to 115200bps (1200,2400,4800, 9600, 19200,38400,57600,115200). Change the data transfer rate for parallel ports.