This Decoder is for all DC locomotives with a current draw up to 1,000 milliamps (motor 1,000 milliamps, lights 300 milliamps). It is suitable for digital locomotives with NEM (S) 6- pin digital connector. • Can be used universally in Selectrix and DCC format • Automatic system and analog recognition • Same locomotive address in Selectrix and DCC operation • 7 adjustable maximum speeds • 4 adjustable motor impulse variations • Automatic load compensation • Connections for light function • Connections for auxiliary function • 4-pin SUSI connector for additional special functions in DCC operation • Short circuit protection for the motor outputs • Overload protection for the light outputs • Overload protection for the auxiliary function outputs • Programming of additional settings by means of selection of the address ”00”, example: finer gradation of steps for pulse widths (monitoring variation), direction reversing In Selectrix Operation: • 31 speed levels • 111 addresses • Block operation with simple diodes ´ (1 or 2 stopping areas) • Braking operation with braking diode In DCC Operation: • Manual speed level selection 14 / 28 levels • Automatic switching to 128 speed levels • Addresses can be either 7 or 14 bits • Braking operation with direct current and ”broadcast-mode” brake generators Dimensions approximately 14 x 9 x 1.8 mm / 9/16” x 3/8” x 1/16”.