The speaker is designed to enhance BugHunter BDA-3’s microphone suppression effect and creates powerful interference from different angles. The speaker connects to BugHunter BDA-3 via mini-jack 3,5 mm port and is equipped with 4 ultrasonic transducers. Up to 4 external speakers can be connected to one BugHunter BDA-3 via splitters. Device is powered from 110/220V electrical mains.
Specifications:
You can increase the effectiveness of "BugHunter DAudio bda-3 Voices" in silent mode by connecting additional ultrasonic speakers
If you already have "BugHunter BDA-3 " microphone suppressor or you plan to obtain one, we recommend to add one or two ultrasonic speakers to it. By paying a little extra, you will be able to protect your meeting room from spyware more reliably. The suppressor provides protection directly in front of it and with additional speakers you can create interference from different sides. In this case ultrasonic interference becomes denser and more effective at suppressing spyware.
It is better to place external speakers in a way so that ultrasonic interference would cover all possible locations of spyware
Using additional ultrasonic speakers is more economical in cost than using two or three "BugHunter BDA-3" suppressors and a lot more efficient than buying expensive suppressors with a large number of transducers pointed in one direction. You need to consider that with every 1 m (3.3 ft) distance, the power of ultrasonic interference decreases 2-3 times, that's why bulky devices with "50 omnidirectional transducers" do not provide the result you expect. It is a fact verified by experiments.
Depending on the size of the room and the positioning of people involved in the conversation, one or two additional ultrasonic speakers might be required. Here we suggest only some of the possible installation layouts, which you can use to determine the best possible scenario for your particular conditions.
If you have one external ultrasonic speaker, place it under the desk.
Or point to the side with transducers facing the other person while the suppressor itself is on the desk in front of you.
When using two speakers, usually one speaker is placed under the desk and other one is placed on a wall or a shelf.
To connect 2 speakers to the device, such a simple audio splitter for 2 mini-jacks 3.5 mm can be used.
Connection type | mini-jack 3.5 mm |
Overall dimensions | 95 х 55 х 23 mm (3.7 x 2.1 x 0.9 inches) |
Weight (without PSU) | 80 g (2.8 oz) |
External source of power supply | 12 V |
Power consumption | up to 0.25 А |
Sound pressure level at 1 m (3.28 ft) | not less than 120 dB |