eBay

4Bros holsters are for a very specific fit; if you are unsure contact us prior to purchase. We reserve the right to decline a return for any reason other than workmanship or quality.

Inside Waistband Holster designed to fit the Springfield Hellcat Pro handgun with the Streamlight 1913 version of the TLR-8 Sub or TLR-8 G Sub light mounted to the pistol.

You will need the TLR-8 Sub 1913 Streamlight part number 69418 or TLR-8 Sub 1913 Streamlight part number 69438 for this holster to function correctly. The holster will NOT retain the pistol without the light being mounted correctly.

The holster WILL NOT WORK with any other TLR-8 Sub version of the light mounted on the pistol, and it will not work for the Hellcat or Hellcat RDP.

Our holsters are vacuum formed with a precision machined mold designed from a CAD model of the actual firearm and light.

Each holster is formed, trimmed, and folded in-house. Final fit and function tests are done with the actual pistol and light to ensure the holster fits the gun/light combination and has the correct amount of retention.

The retention of the holster is easily adjusted so that the fit can be dialed into your personal preference.

Features:

Full Sweatguard
Adjustable retention
Adjustable ride height and cant.
Made from .080" thick thermoplastic for durability
Open Muzzle for threaded barrels or compensators
Minimal material and smooth edges to reduce printing.
The holster is designed to accommodate a red dot sight mounted to the pistol
Optional Modwing includes 2 inserts to allow the user to adjust the amount of leverage placed against the inside of the belt to reduce firearm printing
Proudly made in the USA.

See Below for the description of each belt attachment:

DCC Monoblock is a high carbon heat treated steel belt attachment with a proprietary coating to prevent rust. The clip is designed for 1.5" width belts with an extremely high clamping force that will not slip off the belt once installed correctly. The Monoblock allows holsters and mag pouches to be worn without a belt as long as the garment is sturdy enough to hold the weight. The under hook design on both legs has a built-in progressive strain relief. In the event it sees a large amount of force, this strain relief coupled with uniform hardness of the steel will gradually bend while continuing to hold instead of just hitting its limit and breaking.Care and maintenance: The surface finish of the clip does not need much attention. If any light scratches or wear marks develop, we recommend a quick yet firm buff with WD40, but anything like vegetable oil, mineral oil, or motor oil will work well. Just put a couple drops on your clip and rub it in vigorously using firm pressure with a lint free cloth. This will help keep it looking it's best cosmetically.

RCS Tuckable Overhook struts are 3/4" wide, 3 1/2" long and made for 1.5" and 1.75" belts. They are injection molded and designed to easily snap over even thick gun belts. They hold very secure on the belt, yet they easily release when you need to remove them. The major advantage of the tuckable overhook is that you can tuck your shirt in between the strut and your holster. There are three attachment points on the leg of the strut spaced 15mm apart center to center. The middle attachment point is a slot and allows the strut to be rotated roughly 10 degrees for cant adjustment in either direction.

IWB Loops feature true PULL-THE-DOT hardware and utilize Biothane Super Flex 3/4" Granite® Black coated webbing. The loops are capable of being attached to belts that are 1.25, 1.5" and 1.75" wide. To install, you slip the holster inside your waistband while running the loops between the outside of your pants and the inside of your belt. Once you have the holster in place, you fold the loops up around the belt and snap the loop back to the holster. Using this belt attachment takes a little more effort to attach and remove the holster to the belt. Once installed, the loops offer a very secure, yet flexible attachment point for the holster. There are also other variants of soft loops, some of which use flexible plastic and leather for the loop material.

The Ulticlip, depending on the product you purchase, functionally all work the same. It is an assembly of stamped, heat treated 1075 Spring Steel with a black oxide finish that works extremely well for beltless carry. The lever on the face of the Ulticlip is lifted, which releases pressure on the inside of the clip allowing space for fabric such as nylon, denim, yoga pants, your Dad's fruit-of-the-loom or your gym shorts to slide in. Once in place, the front lever is closed and the Ulticlip pinches the material and holds the holster in position on your waist. It also works really well behind a belt.

The UltiTuck combines 3 great features into 1 clip. It replaces most two hole horizontally mounted clips while providing the additional features. Is is a tuckable design. The innovative design transforms a traditional holster into a tuckable holster. It allows for beltless carry. The Ultituck is built around the Ulticlip patented locking system which allows for beltless carry It provides user adjustable cant. The two T shaped slots allow for adjustable cant and variable mounting hole widths of .60″ to 1″. UltiTuck provides the same great retention and concealment as found in the original Ulticlip.

Retail Price Starting At: 87.50

*We strongly suggest you apply a removable thread locker to each screw of your holster after you receive it to prevent lost screws while the holster is in use.

Our holsters are designed to hold firearms with a secure fit and proper retention so that you have the confidence to carry concealed in precarious situations. With that in mind, the holsters need to touch your firearm in several places to reduce or eliminate a loose fit and establish a good level of retention. The fit of our holsters may cause some wear marks on your pistol. This will typically occur at the top of the slide on each side of the sight, on each side of the slide and possibly on the weapon mounted light if applicable. If your firearm has a soft finish, there is a possibility that the holster will wear or scratch that finish more than normal.
We suggest keeping your holsters clean and free of dust and debris to reduce the amount of wear that dirt and debris might cause. If holster wear is a significant concern to you on your firearm, we suggest you keep your pistol in a lockable case or in a gun safe and not in our holster.

Return Policy:

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase, a thorough description of the issue and pictures or video as evidence. Permission to proceed with the return will be provided via eBay messaging.
We will not allow returns for wrong color ordered or initial holster break in residue left on the firearm. We commit to explaining this in detail with you at anytime before or after your purchase.
We reserve the right to decline a return for any reason other than workmanship or quality.