Features:
Official SCULPFUN S9 Assist: It is an all-metal structure and fits perfectly with the SCULPFUN and S9 . Installation is very simple and you only need a few minutes to install.
High-speed -assist Nozzle: Like the S10 nozzle, it is a high speed -assist nozzle with fluid mechanics design. Only a 30L/min pump can achieve a high-speed airflow of 13.5m/s.
Faster and Cleaner: S9 assist will greatly improve the cutting ability of the S9 . With assist S9 cuts plywood and MDF boards 2-3 times faster, and cutting surfaces are cleaner and no smoky.(The pump is not included in this package)
Sealing: The S9 nozzle has a sealing , and the of the pump will not leak from the . In addition, the sealing keeps out dust, which will increase the lifespan of the S9 lens.
Complete Accessories for Air Assist Upgrade: The package includes SCULPFUN S9 assist nozzle, , sealing and other installation accessories you need. You don't need to buy additional accessories except pump, directly to upgrade the S9 machine.
Specification:
Model: SCULPFUN S9 Assist Kit
-assisted tube outer diameter: 8mm
Inner diameter of trachea: 7.5mm
pump selection suggestion: Recommended choosing pump of ≥30L/min, and the outer diameter of the pump interface is around 8mm.
Package Weight: 0.185kg/6.5OZ
Package Size: 19x15x8cm/7.4x5.9x3.1in
Packing List:
1 x S9 Nozzle Kit
1 x Acrylic Cover
1 x 2 meters
1 x Tool Kit
1 x Manual
Note:
● Because of the powerful with assist, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
● For detailed machine instructions, please refer to the manual for parameter settings.
● When operating the engraving machine, please wear protective .
● Do not the with your hands, otherwise you may burn your hands.
● Please strong impact on the machine.
● It is forbidden for children under 14 years old to use this product, and over 14 years old need attended.
● Do not use the directly to any specular reflection object, which may cause injury to the operator or burn the .
Official SCULPFUN S9 Assist: It is an all-metal structure and fits perfectly with the SCULPFUN and S9 . Installation is very simple and you only need a few minutes to install.
High-speed -assist Nozzle: Like the S10 nozzle, it is a high speed -assist nozzle with fluid mechanics design. Only a 30L/min pump can achieve a high-speed airflow of 13.5m/s.
Faster and Cleaner: S9 assist will greatly improve the cutting ability of the S9 . With assist S9 cuts plywood and MDF boards 2-3 times faster, and cutting surfaces are cleaner and no smoky.(The pump is not included in this package)
Sealing: The S9 nozzle has a sealing , and the of the pump will not leak from the . In addition, the sealing keeps out dust, which will increase the lifespan of the S9 lens.
Complete Accessories for Air Assist Upgrade: The package includes SCULPFUN S9 assist nozzle, , sealing and other installation accessories you need. You don't need to buy additional accessories except pump, directly to upgrade the S9 machine.
Specification:
Model: SCULPFUN S9 Assist Kit
-assisted tube outer diameter: 8mm
Inner diameter of trachea: 7.5mm
pump selection suggestion: Recommended choosing pump of ≥30L/min, and the outer diameter of the pump interface is around 8mm.
Package Weight: 0.185kg/6.5OZ
Package Size: 19x15x8cm/7.4x5.9x3.1in
Packing List:
1 x S9 Nozzle Kit
1 x Acrylic Cover
1 x 2 meters
1 x Tool Kit
1 x Manual
Note:
● Because of the powerful with assist, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
● For detailed machine instructions, please refer to the manual for parameter settings.
● When operating the engraving machine, please wear protective .
● Do not the with your hands, otherwise you may burn your hands.
● Please strong impact on the machine.
● It is forbidden for children under 14 years old to use this product, and over 14 years old need attended.
● Do not use the directly to any specular reflection object, which may cause injury to the operator or burn the .