Feature
*This product has a pair of infrared launch and receiving pipes. The transmitting tube emits a certain frequency of infrared rays. When the detection direction encounters obstacles (reflected surfaces), the infrared reflection is returned and received. The indicator light will light up, and at the same time, the signal output interface outputs digital signal (a low level signal), which has strong adaptability to the environmental light.
*You can adjust the potentiometer. The sensor interference is small and easy to install and easy to use. It is widely used and is used in many occasions such as robotics, obstacle avoidance cars, assembly line counts, and black and white line tracking.
*The detection distance can be adjusted by the potentiometer knob, the effective distance range is 2 to 30cm, and the working voltage is 3.3V-5V.
*When the module detects the obstacle signal in front, the green indicator light on the circuit board lights up the level, and the OUT port continues to output low level signals. Adjust the device, clockwise the potentiometer, the detection distance increases; the counterclockwise potentiometer will decrease.
*The sensor actively infrared reflection detection, so the target's reflectance and shape are the key to the detection distance. Among them, the black detection distance is the smallest, the largest in white; the small area of the small area is small and the distance is large.
Specification
Connection: The output port out of the sensor module can be connected directly with the single -chip IO port, or it can directly drive a 5V relay directly
Connection: VCC-VCC; GND-GND; OUT-IO
Comparison: LM393, stable work;
Power: 3-5V DC power can be used to power the module. When the power supply is turned on, the red power indicator lights lit
Installation: It has a screw hole of 3mm, which is convenient for fixing and installation
Circuit board size: 3.2cm*1.4cm
Quantity: 5PCS
Note: Each module has adjusted the threshold comparison voltage through the potentiometer at the delivery. It is not special case. Do not adjust the potentiometer at will.
Module interface description:
1 VCC external 3.3V-5V voltage (can be connected directly with 5V single-chip machine and 3.3V single-chip microcomputer)
2 GND external GND
3 OUT small board digital quantity output interface (0 and 1)
Package included
5*Smart Car Robot Module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.