Description
K7 Base C XC7K325T Development Board FPGA Development Board with Dual Gigabit Port for Kintex DIY
Features:
- FPGA development board
- There are many on-board interfaces
- Abundant on-chip resources
- MCU-grade chip makes it cost-effective
- Development software companion version VIVADO2020.1
Chip resource:
- Main chip model: XC7K325T-2FFG676I
- Chip grade: Industrial grade
- Recommended maximum clock speed: PLL/MMCM recommends a maximum speed of 709M
- DDR specifications: MT41K256M16TW-107, 32-bit, 1GByte, 1600M
- Logic cells (LC): 326,080
- Slices: 50,950
- DSP unit multiplier: 840
- Trigger: 407,600
- RAM: 160, 20Kbit
- Device temperature range: -40 to 85°C
- Speed class: -2
- Number of GTX: 16
Parameter description of the functional interface of the development board:
- Power supply mode: 9-12V/3A customized power supply with TYPE-C interface, power supply through DC-IN
- Heat sink connector: Heat sink connector with a GH1.25-3P connector on board
- Clock resources: 50M single-ended crystal oscillator, 156.25M differential crystal oscillator, and one SMA clock interface
- Ethernet: Two Gigabit RGMII ports. The models of the ports are RTL8211E-VL and RTL8211E-VB
- User buttons: 5 user buttons, 1 power-on/reset button, support chip reset and reconfiguration
- Debugger: On-board TYPE-C interface downloader debugger. Support online debugging and downloading
- Serial port: CH340 serial port with one TYPE-C interface
- SD card slot: One flip-top TF card holder, support SPI interface
- HDMI interface: two channels support output up to 1080 at 60HZ
- On-board LEDs: 2 power status LEDs, 8 FPGA LEDs, DONE, PCIE power supply
- Set Switch: A voltage DIP switch that sets the LA differential pin of the FMC interface
- Onboard FLASH: MX25L25645G particles, 32MByte space
- EEPROM: A 24C02 EEPROM memory chip
- PCIE interface: PCIE 2.0 X8, need X8 or X16 physical slot
- On-board OLED module: 0.96-inch SSD1306-driven OLED module, 128x64 monochrome
- IO expansion port: FMC LPC and 40P standard 2.54 double-row expansion port; FMC includes LA (34 pairs differential + 2 pairs of clock differential) and 1 pair of GTX; The 40PIN 2.54 IO expansion ports contains only 34pcs 3.3V single-ended IO
- Optical communication interface: 2CH SFP+, support 10G optical communication
Attention:
- FMC uses ANK12 and 13 for HR BANK, and LVDS only supports 2.5V LVDS_25.
- The 40P 2.54 expansion ports use BANK16 for HR BANK, and the voltage is fixed 3.3V single-ended.
Package Included:
- 1 x Development board
Note:
- SD card is not included.
Features:
- FPGA development board
- There are many on-board interfaces
- Abundant on-chip resources
- MCU-grade chip makes it cost-effective
- Development software companion version VIVADO2020.1
Chip resource:
- Main chip model: XC7K325T-2FFG676I
- Chip grade: Industrial grade
- Recommended maximum clock speed: PLL/MMCM recommends a maximum speed of 709M
- DDR specifications: MT41K256M16TW-107, 32-bit, 1GByte, 1600M
- Logic cells (LC): 326,080
- Slices: 50,950
- DSP unit multiplier: 840
- Trigger: 407,600
- RAM: 160, 20Kbit
- Device temperature range: -40 to 85°C
- Speed class: -2
- Number of GTX: 16
Parameter description of the functional interface of the development board:
- Power supply mode: 9-12V/3A customized power supply with TYPE-C interface, power supply through DC-IN
- Heat sink connector: Heat sink connector with a GH1.25-3P connector on board
- Clock resources: 50M single-ended crystal oscillator, 156.25M differential crystal oscillator, and one SMA clock interface
- Ethernet: Two Gigabit RGMII ports. The models of the ports are RTL8211E-VL and RTL8211E-VB
- User buttons: 5 user buttons, 1 power-on/reset button, support chip reset and reconfiguration
- Debugger: On-board TYPE-C interface downloader debugger. Support online debugging and downloading
- Serial port: CH340 serial port with one TYPE-C interface
- SD card slot: One flip-top TF card holder, support SPI interface
- HDMI interface: two channels support output up to 1080 at 60HZ
- On-board LEDs: 2 power status LEDs, 8 FPGA LEDs, DONE, PCIE power supply
- Set Switch: A voltage DIP switch that sets the LA differential pin of the FMC interface
- Onboard FLASH: MX25L25645G particles, 32MByte space
- EEPROM: A 24C02 EEPROM memory chip
- PCIE interface: PCIE 2.0 X8, need X8 or X16 physical slot
- On-board OLED module: 0.96-inch SSD1306-driven OLED module, 128x64 monochrome
- IO expansion port: FMC LPC and 40P standard 2.54 double-row expansion port; FMC includes LA (34 pairs differential + 2 pairs of clock differential) and 1 pair of GTX; The 40PIN 2.54 IO expansion ports contains only 34pcs 3.3V single-ended IO
- Optical communication interface: 2CH SFP+, support 10G optical communication
Attention:
- FMC uses ANK12 and 13 for HR BANK, and LVDS only supports 2.5V LVDS_25.
- The 40P 2.54 expansion ports use BANK16 for HR BANK, and the voltage is fixed 3.3V single-ended.
Package Included:
- 1 x Development board
Note:
- SD card is not included.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.