Note:

1. ORTUR Laser Master 2 PRO S2 LU2-4-SF is good at cutting and better at engraving harder materials (such as stainless steel and other hard materials), and could support a higher speed.

2. It is not that the smaller the laser spot, the better the effect. When engraving photos, you may need to increase the laser spot to get a better picture effect.

3. The competitors may falsely promote the power of similar laser modules as 40W, or even 60W, please take care.

4. Extra Accessories：Safety Glasses, 10PCS Metal Business Cards, 2PCS Color Paper, 4PCS Pet ID Tags.

5. Focal Length: It has a shorter Focal Length, so it has a smaller Focal Spot, but shorter Depth of Field.

ADVANTAGES:

1. 24V Electric System: More power,lower current,safer,support to expand more adds-ons.

2. CABLE LOOM Flexible Cable: Cable Loom accommodating wires, beautiful and clean.

3. SCALE MARK Auxiliary Use: A scale is printed on the aluminum profile for easy position adjustment.

4. FULL METAL BODY Structure: Full sheet metal + aluminum profile body, when fasten graving machine, the body does not shake, and the machine runs more stably.

UPGRADE MOTHERBOARD

1. Specialized Motherboard with 32Bits MCU. It could pre-process 32 instructions, support baud rate as high as 921600, more powerful!

2. The Most Advanced 32Bits Laser Engraver Firmware - ORTUR laser master firmware, smarter, faster, higher precision and easier to use.

3. Laser power range could be S0 - S1000, compared to 8Bits desktop laser engravers, which only has S0 - S255, ORTUR Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8Bits high power laser engravers could not do.

4. Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S )

SAFETY PROTECTION SYSTEM:

Flame Detector & Buzzer Alarm: When the laser engraver detects flame, it will automatically stop and beep.

Emergency Stop: There is a switch for emergency stop. Once there is a emergency in the process of engraving, you can press the emergency stop switch to stop engraving.

Active Position Protection: There is a G-sensor on the motherboard. Once the laser engraver detects unauthorized movement, the laser beam will stop.

Laser Beam Safety Guard: If your computer system halted or USB cable disconnected and then the laser engraver stops moving, the laser beam will stop to prevent fire.

Exposure Duration Detection and Limitation: Once the laser cutter is under control but the users forget to operate it, the motor will stopped working. And then the laser beam will stopped after a while to prevent fire.

Power Control System: Once the laser engraver disconnect to the power, it would cut the power to the laser module.

New Eye Protection Design: Adopts newly laser protective cover, the ORTUR laser engraving machine can filter out 98% UV light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.