eBay

868MHz/915MHz RFID IOT Receiver Remote Control SAW Bandpass Filter 1dB 4MHz Bandwidth with SMA Connector for Radio Amplifiers

SMA-M means male connector
SMA-F means female connector

868MHz filter:

The 1dB bandwidth of this filter is 4MHz, optimized for the performance of 868MHz RFID receivers, standard LoRa IoT node devices
European, which can effectively filter out-of-band signals, reduce noise, and increase dynamic range.

Model: FBP-868s
Impedance: 50 Ohms
Center Frequency: 868MHz
Passband (1dB bandwidth): 866 to 870 MHz
Band insertion loss: <3.5 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

915MHz filter:
This filter has a 26MHz 1dB bandwidth and is optimized for use in 915MHz RFID receivers to effectively filter out-of-band signals, reduce noise and increase dynamic range.

Model: FBP-915s
Impedance: 50 Ohms
Center Frequency: 915MHz
1dB pass band: 902 to 928 MHz
Band insertion loss: <= 2.0 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

1090MHz filter:
This filter guarantees an access bandwidth of 30MHz with low insertion loss. Optimized for performance on 1090MHz ADS-B receivers,
Effectively filters out-of-band signals, reduces noise and increases dynamic range. The device is ultra-small and easy to use.
Model: FBP-1090s

Impedance: 50 Ohms
Center Frequency: 1090MHz
Bandwidth (1 dB bandwidth): 30 MHz
30dB Bandwidth: <80MHz
Band insertion loss: 1.7 to 2.2 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

5.8G filter:
This filter has a center frequency of 5750MHz and a 3dB bandwidth of about 600MHz, and is a film circuit structure
fine multi-layer It is used for interference resistance and performance optimization of 5.8G wisax, WiFi and other wireless system receiving devices. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range.
Model: FBP-5800
Impedance: 50 Ohms
Center Frequency: 5750MHz
3 dB band: 5450 ~ 6100 MHz
Insertion Loss: <2.5dB @ 5100~6050MHz
Maximum load power: 5 W (37 dBm)
Interface: SMA-M, SMA-F (symmetrical RF characteristics at both ends, non-directional)

400-475MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
400 ~ 475 MHz (433.92 MHz, 435MHz) Dedicated VTX receiver, laboratory and other highly selective applications.
Model: FBP-433
Impedance: 50 Ohms
Center Frequency: 433MHz
Center Frequency Insertion Loss: <= 3.5 dB @ 433 MHz
3 dB bandwidth: 390 to 470 MHz
30 dB bandwidth: 350 to 560 MHz
Impedance band greater than 50 dB: DC ~ 250 MHz and 1100 ~ 2500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F

2.4G 2440MHz filter:
This filter has a bandwidth of 80MHz and is used to optimize the performance of 2.4GHz receivers and to prevent WiFi interference,
systems compatible with Bluetooth and Zigbee. Which can effectively filter out-of-band signals, reduce noise and increase dynamic range.

Model: FBP-2440s
Impedance: 50 Ohms
Center Frequency: 2440MHz
Spurious: 2400 ~ 2480 MHz
Band insertion loss: <3.5 dB
Maximum load power: 10mW (10dBm)
Interface: SMA-M, SMA-F

144MHz filter:
The characteristics
Ultra-small size, excellent selectivity, high out-of-band rejection.
The applications
144MHz for communication receivers, for HAM 2m band, laboratory and other high selectivity applications.
Model: FBP-144
Impedance: 50 Ohms
Center Frequency: 144MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 144 MHz
3 dB bandwidth: 127 to 157 MHz
30 dB bandwidth: 105 to 200 MHz
Impedance band greater than 50 dB: DC ~ 85 MHz and 300 ~ 1400 MHz
Maximum load power: 3 W (35 dBm)
Interface: SMA-M, SMA-F

915(890-970)MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
Dedicated 890-970 MHz VTX receiver, laboratory and other highly selective applications.
Model: FBP-915
Impedance: 50 Ohms
Center Frequency: 935MHz
Center Frequency Insertion Loss: 2.3 to 2.8 dB @ 915 MHz
3 dB bandwidth: 890 to 970 MHz
30 dB bandwidth: 780 to 1070 MHz
Impedance band greater than 50 dB: DC ~ 500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F

900MHz filter:
This product is a narrow band low noise RF amplifier, the product covers 10MHz ~ 2.4GHz frequency band. It can improve the sensitivity
receiver and reduce system noise. This product has a strong aluminum protective shell, anti-electromagnetic interference, shape
compact, can be directly inserted into the original antenna system to use. (Note: This product is not waterproof, waterproof treatment needs to be done for outdoor use.)
Model: AMP-900
Impedance: 50 Ohms
Noise factor: <= 2.5dB
Center Frequency Gain: >= 20 dB @ 850 ~ 950 MHz (Typical Value: 20 ~ 22 dB
Input reflection loss: > 15 dB @ 900 MHz
Supply voltage: + 5 VDC
Operating current: 15 to 20mA
Maximum input power: < 0 dBm
P1dBm: ≈ 6dBm

403MHz filter:
This filter has a low insertion loss in band and is designed to optimize the performance of 403 MHz satellite reception equipment.
It can effectively filter out-of-band signals, reduce noise, and increase dynamic range. This product has an ultra-thin PCB board on the
inside, which still has excellent suppression ability for far out-of-band signals, and its performance is much better than those of
products made of bare PCB board; Uses an aluminum alloy protective shell, which is anti-interference, has no false feedback outside
band, compact, resistant and easy to use.

Model: FBP-403s
Impedance: 50 Ohms
Center Frequency: 403MHz
1dB pass band: 401-405 MHz
Insertion Loss: < 2.5dB @ 401 ~ 405 MHz
Maximum load power: 100mW (20 dBm)

870MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
GSM mobile test systems, RFID communication systems, laboratories and other highly selective applications.
Model: FBP-870
Impedance: 50 Ohms
Center Frequency: 870MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 870 MHz
3dB Bandwidth: 825 to 920MHz
30 dB bandwidth: 740 to 1000 MHz
Impedance band greater than 50 dB: DC ~ 650 MHz and 1150 ~ 2200 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F

About Us
Shipping
Returns
Feedback
Contact us

About Us

Welcome to Drones and drone accessories wholesale factory wholesale shop. Our mission is to provide our customers with the highest quality products and customer service. Customer satisfaction is our number one priority and whenever and wherever you need anything, all you have to do is simply ask and we will do our best to help you.

Shipping

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance.

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!

Returns

1. You have 30 days to contact us No reason to return within 30 days after signing，The shipping cost is Seller .

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction.

It is impossible to address issues if we do not know about them!

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond in a timely manner and will do our best to help you out. We encourage our customers to contact us with any questions or concerns. We'd like to be sure you are completely satisfied with your purchase.