Untitled Document

DIGITAL SERVO TESTER / ESC CONSISTENCY TESTER STEERING GEAR MEASUREMENT FOR FPV RC HELICOPTER AIRPLANE CAR SERVO TESTER TOOL

CCPM Servo Consistency Master / Servo tester

The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.

There are 3 modes to check servos or ESC:

Manual mode: turn the knob with different speed, check the reaction time.

Neutral mode: make the servo go back to the neutral point.

Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.

It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.

You can also connect 1-3 ESC to test and compare their reaction time respectively.

It can connect 3 servos of the CCPM helicopters and select servos.

It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

Voltage consumption: DC4.8-6V

Size: 48 x 42 x 17mm

Weight: 31.5 g

Output: 15mA (5.0)

Input: DC 4.5 ~ 6V

Neutral point output signal: 1.5ms 0.5ms

Size: 42.5 x 24.0 x 23.5mm

Weight: 8g

Pulse width adjustment mode: automatic / manual adjustment / automatic neutral point signal output

Specifications:

built-in BEC or UBEC

3 Pulse width adjustment mode

15mA Output

DC 4.5 ~ 6V Input

1.5ms0.5ms Neutral point output signal

easily detect the clearance, jitter and median of all kinds of Servo

This RC CellMeter-8 digital battery capacity checker is able to be used for LiPo LiFe Li-ion NiMH Nicd batteries.

Features:

Support Battery Type:LiPo, LiFe, Li-ion, NiCd, NiMH

Servo Test Mode:Manual adjustment, Auto Matic, Neutral

Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz

Display Mode: Battery cell voltages, Total Voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and Lowest cell voltage, Remaining battery capacity(%).

Specifications:

Item size: 8.5 * 5 * 1.6cm

Item Weight: 40g

Package size: 10.5 * 10 * 2cm

Package Weight: 55g

Material: Plastic

Color: Black

Size:7.5 cm x 3.8 cm x 2.5 cm

Weight: 0.88 ounce (30 g)

Input voltage: DC 5~6V

Output signal width: 800~2200us

Can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes

With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us

50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse

Button the Select (Note: the key switch function, circulation patterns)

1. S-1 manual mode (Manual)

2. S-2-bit mode (Neutral)

3. S-3 automatic mode (Automatic)

Keys pulse width -

1. 50H analog servo signal cycle 20us frequency 50Hz

2. 125H digital the steering gear a signal cycle 8us frequency 125Hz

3. 250H Digital Servo signal cycle 4us frequency 250Hz

There are 3 modes to check servos or ESC:

Manual mode: turn the knob with different speed, check the reaction time;

Neutral mode: make the servo go back to the neutral point;

Automatic ''window wiper'' mode: make the servo swing like a window wipers in the biggest angle.

It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.

You can also connect 1-3 ESC to test and compare their reaction time respectively.

It can connect 3 servos of the CCPM helicopters and select servos.

It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

With LED indicators.

Specifications:

Output: 15mA (5.0)

Voltage consumption: DC4.8-6V

Output signal: 1.5ms±0.5ms

Item Color: Blue

Size: 48mm*42mm*17mm

Net Weight: 30g

Package Weight: 45g

Button the Select (Note: the key switch function, circulation patterns)

1. S-1 manual mode (Manual)

2. S-2-bit mode (Neutral)

3. S-3 automatic mode (Automatic)

Keys pulse width:

1. 50H analog servo signal cycle 20us frequency 50Hz

2. 125H digital the steering gear a signal cycle 8us frequency 125Hz

3. 250H Digital Servo signal cycle 4us frequency 250Hz

Specifications:

Brand: HJ

Material: Plastic

Color: Blue + black

Input voltage: DC 5~6V

Output signal width: 800~2200us

Package size: 14 * 10 * 3cm / 5.5 * 3.9 * 1.2in

Package weight: 39g / 1.4oz

Input voltage: DC4.8-6v

Size: 49×34.5×16.5mm

Weight: 15g

It’s with small size and easy to carry.

Four groups of servo connector and it can insert four servos to test at the same time.

The digital tube will real-time display the sizes of pulse width.

Support two test modes: manual operation and self-motion.

Features:

Input Voltage: 4.6-6V

Size: 73.5*43.5*22.5mm

Net Weight: 108g

RETURNS

If you are not happy with your purchase or you change your mind for any other reasons, you may cancel your order any time within 30 days, beginning on the day you received the item(s). We will refund the price of the goods in full provided the item is returned in a saleable state. Buyer pays return postage except if we are at fault. All communication must be through the eBay messaging system.

PAYMENTS

We accept Payments via Paypal. The safest, easiest and most secure method of online payment. Need to pay via Credit/Debit card, Apple Pay, Google Pay? No problem. Payments managed by eBay seamlessly handles and processes making your payment a smooth and secure process.

FEEDBACK

We believe in 100% customer satisfaction. When you receive the product, please leave us positive review. Positive feedback would motivate me to service you better and others. In case if you are unsatisfied, please do not leave negative or medium feedback, we believe that every problem can be resolved.