Connection: USB cable connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP,Windows7/ 8 / 10 etc)
Package include:1Pc 125KHz RFID Duplicator
Write: EM4305 CET5557 T5577 5200 EM4205 etc cards or Keys
Built-in: individual LED lights and buzzer indicator, transceiver antenna
Power Supply: 3V (2 x AAA battery) (Batteries not included)
Times: Read / Write > 20000 times
Size: ( L*W*H ): 115 x 70 x 30mm/4.53x2.75x1.18inch
Read: EM / TK (EM4100 TK4100 etc) cards or keys
Weight: 70g
Attention:
Please note: it only supports ID cards, not supports IC cards, and supports writing T5577, EM4305, CET5200 and all T5577, EM4305 compatible cards, please know your cards type before buying
IDW01 RFID Reader Duplicator 125khz
Handheld shape design, comfortable hand feeling and high quality.
2 buttons for simple operations.
Standalone operation, no need to connect with computer / PC, easy to use.
Built-in individual LED lights and buzzer indicator.
Reading distance is 0 - 6cm.
Can only copy 125KHz RFID card, Compatible with T5577, CET5200, EM4305 and EN4305.
usage method:
1, Start device
1. Push the switch on the right side of the device upward, the red light will be on, and the green and yellow lights will flash at the same time, indicating that the startup is successful, otherwise it can be restarted once.
2. After the device is started, no card will be read at this time, and then press the device card writing button to write the card as an all 0 ID card. After the card is successfully written, the buzzer beeps twice and the green light comes on.
3. When any key is pressed, the yellow light will light up, indicating that the device is working.
2, Read-write card
1. Push the switch on the right side of the device upward, the device beeps 2 or 3 times, and the green and yellow lights flash at the same time, indicating successful startup;
2. First place the bus bar card at the antenna position on the left side of the device, press the card reading button, and the device beeps twice, indicating that the card reading is completed, and the green light is on at the same time;
3. Change a new card, press the write card button, and the device beeps twice to indicate that the card is successfully written. At the same time, the green light indicates that the card is successfully written.
5. Put writable EM4305 key on the back side of the copier and press "Write"
