Features:

Pre-assembled package
1.It doesn't require much time and effort to set up, and it's simple to use.
2.It is suitable for both novices and veterans.
3.It's an actual plug-and-play laser engraver for everyone!
Bring your imagination into reality with Aufero Portable Laser Engraver. It is the perfect entry-level laser engraver for beginners and hobbyists with a pre-assembled design, advanced firmware, and wide versatility.
4.The Aufero portable laser engraver works on lots of materials includingGlass,Wood,MDF, paperboard, plywood, acrylic, leather, powder-coated metal, stone, ceramics，mirorr，leaf，granite，non-woven fabric，Stainless steel，rubber，and even food. It can be used for artistic creation, soft outfit design, logo design, life record and the possibility is endless.

The Aufero portable laser engraver is built with four safety protections, allowing you to hook on your project without any worry.

  1. Active Position Protection-Position deviation happened-The laser beam stopped automatically and immediately.

  2. Laser Beam Safety Guard-USB signal transmission failed- The laser beam stopped automatically in three seconds.

  3. Exposure Duration Detection and Limitation-No movement of motor-The laser beam stopped automatically after a while.

  4. Power Control System-The input voltage is abnormal - The power supply to the laser module will be stopped.


  • Pre-assembled Package: The Aufero 1 portable laser engraver comes pretty much assembled; simply insert the laser head into its holding bracket and connect the two wires and it is going to work right out of the box; perfect entry-level laser engraver for the beginners and hobbyists

  • Advanced Firmware: Adopting advanced motherboard (32-bit MCU) for fast and precise engraving; processes 32 instructions and supports up to 921600 baud rate;

  • Broad Compatibility: The Aufero 1 laser engraver works with mature engraving software-LaserGRBL(free), LightBurn(paid); supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux systems; supports BMP, JPG, PNG, JPEG, SVG file types; works on food, MDF, paperboard, plywood, black acrylic, leather, powder-coated metal, stone, etc

  • 4 Safety Protection: Built with 4 protections: active position protection, exposure duration detection and limitation, laser beam safety guard and current safety control system; full safety protection allows you to hook on your project without any worry

  • Dual Eye Protection: The Aufero 1 laser engraving machine features a protective cover that effectively filters 97% UV light and protects your eyes from dazzling beam; comes with a pair of goggles for more protection; kind reminder: do not stare into the beam



TIPS:  

LU2-10A:More Powerful Engraving with True 10W Output Power -Aufero LU2-10A is newly upgraded with a 10W laser module, which makes the cutting speed up to 15,000 mm/min. The compressed point is 0.05mm x 0.1mm.The optical power reaches to 10W. It can cut 30mm acrylic and 20mm wood. At the same time, the laser module of the engraving machine has a built-in air-assist interface, which is designed for cutting.

LU2-4-LF  long focus laser module of the Aufero laser engraver has a real luminous power of 4,500-5,500mw and 0.17 x 0.25mm focal spot. With high power and a long depth of field, it is good for engraving and cutting.
Note: The module can work with an air compressor (not included in the package) for enhanced performance. Aufero recommends an air source with a flow of ＞40ml/min.
LU2-2  fixed focus laser module of the Aufero laser engraver has a real luminous power of 1,000-1,600mw and 0.07 x 0.06mm focal spot, perfect for engraving high precision patterns.
LU2-4-SF  short focus laser module of the Aufero laser engraver has a real luminous power of 4,500-5,500mw and 0.12 x 0.15mm focal spot. With high power compressed spot, it is good at cutting and better at engraving hard materials.