LIITOKALA LII-PD4 LII-PD2 LII-S12 SMART 18650 BATTERY CHARGER FOR NIMH LIFEPO4 LI-ION 3.7V 1.2V 26650 14500 26700 18350 AA AAA
User Manual Lii-PD4
Cautions:
1.This charger can charge all cylindrical rechargeable batteries 3.7VLi-Ion,3.8VIMR,1.2VNi-MH/Cd, 3.2VLiFePO4
2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
3.If DC input, only12V1Ais recommended
4.Mind heating while charging
5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
6.For indoor use only
7.The displaying dataonly for reference, please refer to professional instrument for more accurate data
Specifications and functions:
1.Multi-powerinput: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
2.Charge current intelligent auto-set of total three levels:500mA /1000mA/2000mA),2000mA is fixed only for slot#4.
3.Multi-functional LCD charging display: for charging progress25% - 50% - 75% -100%,battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V(IMR), charging capacity, voltage and current: 0.5A/1A/2A.
4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
5.Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)
6.Multi-safety protection function of over-charge and over-discharge,short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
7.Charging at constant voltage and current
Button and LCD :
1.Button of Mode(Channel button):there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted, 1)Short click the channel button in 5Sto change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;
Note: Battery type can be only selective before charging starts.
2.LCD: While power supply connected, the LCD will light up for 3S:1) If no battery is inserted, the LCD will display "null" and will be off in 30S2) When battery is inserted and detected, the LCD will show channel number while the battery type image "Li-Ion 3.7V"flashingindicatingto set the battery type: this moment if short click the channel button, it can set battery type; if no operationin5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH)then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display"100%"mean while it shows "End" on the LCD right down corner.
LCD display graphic reference:
Lii-PD4 Electrical Parameters:
1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)
2. Output voltage: DC 4.2V for Li-Ion 3.7V
DC 4.35V for Li-Ion 3.8V( IMR)
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot#4),1000mA*2, 500mA*3 500mA*4
NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4
4. Constant voltage, cut-off current: less than 100mA
5. Standby current: less than 15mA
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440, NiMH/Cd: AA, AAA,SC, C
Size and weight:
147mm x 100mm x 37mm (L x W x H)
Weight: approx221g (not including AC cable)
Lii-PD2 Charger Features:
1. Adopt DC12V1A (nominal) input, two-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity!
3. There are three levels of charging current: 0.5A/1.0A/2.0A, the default charging is 0.5A, you can long press the corresponding button to select the charging current;
4. When charging, the LCD can display channel CH and the charging current, voltage, time, capacity and battery type of this channel Li-Fe 3.20V /Li-ion 3.70V /Li-ion 3.85V (IMR); the total charging current of the two slots does not exceed 2A, that is, when one of the slots is charged with 2A current, and then the battery is charged in the other slot, the front 2A current will drop back Charge up to 1A current; when the battery is fully charged, the LCD will display FULL;
5. It can automatically identify lithium battery (Li-Ion 3.70V) battery and nickel-metal hydride (Ni-MH) battery, and manually select lithium iron phosphate battery (3.20V) and Li-Ion 3.85V battery;
6. With 0V voltage activation function, 1.65-2.20V cannot be charged (but there will be activation current trickle charging).
7. There are multiple safety protection functions such as overcharge, overdischarge, short circuit, etc. At the same time, it can intelligently and automatically identify bad batteries;
8. Charging mode: constant current and constant voltage.
Electrical technical parameters:
1. Input power: DC 12V 1A
2. Output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current (optional): Li-Ion/IMR/LiFePO4: 2000mA*1 (only one)/1000mA*2/500mA*2
NiMH/NiCd: 500mA
4. Constant current/constant voltage charging, cut-off current: <100mA;
5. No-load standby current: <15mA;
LII-S12 Electrical technical parameters:
1)Input power: DC 12.0V 3.5A
2)Output voltage: DC 4.20V for Li ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/Ni-cd
DC 9.0V for NiMH
3)Output current:
Li ion/IMR/LiFePO4: 1.0A * 6 (only channel 1/3/5/7/9/11)
NiMH/Nicd: 0.50A*8
NiMH-9V: 85mA*2
4)Constant current/constant voltage charging, cut-off current: 100mA;
5)No load standby current:<50mA;
5).Compatible battery type and model
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH/Cd: AA, AAA,SC, C
6). Charger size:
287.0mm × 142.5mm × 35.0mm (L/W/H)
Weight: g (excluding data cable)
