Survive the Coffee Machine Apocalypse with Our Ultimate Dual Boiler Survival / Service Kit!

Whether it's a faulty pump, a buzzing solenoid, or a leaky seal, this kit allows you to carry out an essential service and/or repair of all the common faults these machines suffer from.

I've worked on these machines for the last 5 years, which has enabled me to put together all the parts that you will need to fix the most common faults that you'll experience on these machines.


Compatible with all Breville Dual Boilers (240v and 120v). 

Feel free to message me before purchasing if you need any advice before ordering. I can sometimes include other parts too that aren't listed.


Some of the problems this kit will fix are:



ORING SERVICE KIT
6 x FKM (Viton) o-rings for longer life under steam temperatures.

12x Small o-rings for hose connectors (water/steam) and NTC probes.

5x Large o-rings for thermal and water level probes.

5x Tiny o-rings for water level probes - including 2 spares as they can damage easily

1x 10g tube of Food Grade Silicone Grease

1x Group Head Gasket/Seal



STEAM VALVE SERVICE KIT
Full set of seals used for the Breveille Dual Boiler Steam Valve. This will allow you to refurbish your valve and fix most leaking or dripping issues.

Note: The 008 o-ring is made from HNBR which is designed for high friction applications such as this. This is what Breville use. Do not use cheaper silicon orings for this part of the valve as they will not last! 



SOLENOID SERVICE KIT
Replacement (Brand new Genuine OLAB made) solenoid piston & core plus o-rings** for Breville Dual boilers with OLAB branded coffee solenoids.
This will resolve buzzing / most dispensing issues.
** It's recommended to use existing Breville washers/pins instead of supplied type if condition is fine. However, the supplied o-rings are made with long-lasting FKM food-grade material designed for high heat situations.




TRIAC REPAIR KIT
2x Replacement Triacs plus 1x Opto Isolator to repair 99% of Traic Board faults on the Breville Dual Boiler.
If your machine is has developed a heating problem caused by leaking orings, then this kit will save you money on a new board.
This kit includes a triac for the steam or coffee circuit and the group head circuit

These components will work on both 240v and 120v versions. SP0010242 / SP0001772
https://www.youtube.com/watch?v=yrz7l5y2xlA



PUMP SERVICE KIT
Fixes weak pressure or loss of pre-infusion on the Coffee Pump (EP5 / EFP5 & Post 2021 EFM) and Steam Pumps (NMEHP)
1x pump valve ball - glass upgrade
1x EPDM Coffee pump piston oring
1x Steam pump piston oring
https://www.youtube.com/watch?v=Gcuq22CC5kc



STEAM + COFFEE/GROUP BOILER THERMAL FUSES
Should the worst happen, then this will get you back on track. You'll get both types of fuses to cover any of the thermal fuses in the machine. There is also a steam boiler thermal switch as you'll likely need this if your machine has the 3 beeps of death.
https://www.youtube.com/watch?v=lcWhYbNrwV4


REPLACEMENT LID LATCH
Over time the top access panel latch can wear out or break off. We have you covered too with an easy to fit replacement.


CABLE MANAGEMENT KIT
Includes all the connectors you'll need to carry out any of the repairs




Thanks


For more info, please check out this channel on Youtube:
https://www.youtube.com/@BrevTech