Features:
High crystallinity and low melting point
1 Bag polymorph Thermoplastic
Good dissolubility
3. Do not . Contact if swallowed.
5. Product may become .
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
Color: White
2. Wait around 5 min after it cools down before you reheat and reshape it again.
5. Re-heat if further molding is required.
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
Size: 4mm
4. Allow the polymorph to cool until solid.
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
3. the pellets from the water and mould by hand (add color at this stage if required)
1. Never heat polymorph over 200 ºC as this will damage the polymer.
Material: Polycaprolactone
4. Product should be ok to use for children 10+
2. Leave the pellets to melt in the water until they turn transparent.
Product Description:
4. Product should be ok to use for children 10+
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
3. Do not . Contact if swallowed.
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
High crystallinity and low melting point
5. Product may become .
Size: 4mm
Material: Polycaprolactone
Good dissolubility
2. Leave the pellets to melt in the water until they turn transparent.
2. Wait around 5 min after it cools down before you reheat and reshape it again.
1 Bag polymorph Thermoplastic
Color: White
4. Allow the polymorph to cool until solid.
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
3. the pellets from the water and mould by hand (add color at this stage if required)
5. Re-heat if further molding is required.
1. Never heat polymorph over 200 ºC as this will damage the polymer.
Material: Polycaprolactone
1. Never heat polymorph over 200 ºC as this will damage the polymer.
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
5. Re-heat if further molding is required.
3. Do not . Contact if swallowed.
Size: 4mm
4. Product should be ok to use for children 10+
2. Wait around 5 min after it cools down before you reheat and reshape it again.
Good dissolubility
1 Bag polymorph Thermoplastic
3. the pellets from the water and mould by hand (add color at this stage if required)
4. Allow the polymorph to cool until solid.
2. Leave the pellets to melt in the water until they turn transparent.
5. Product may become .
High crystallinity and low melting point
Color: White
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
2. Wait around 5 min after it cools down before you reheat and reshape it again.
4. Allow the polymorph to cool until solid.
4. Product should be ok to use for children 10+
Material: Polycaprolactone
2. Leave the pellets to melt in the water until they turn transparent.
5. Re-heat if further molding is required.
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
High crystallinity and low melting point
3. Do not . Contact if swallowed.
Color: White
3. the pellets from the water and mould by hand (add color at this stage if required)
Good dissolubility
1 Bag polymorph Thermoplastic
1. Never heat polymorph over 200 ºC as this will damage the polymer.
5. Product may become .
Size: 4mm
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
2. Wait around 5 min after it cools down before you reheat and reshape it again.
5. Product may become .
5. Re-heat if further molding is required.
4. Allow the polymorph to cool until solid.
4. Product should be ok to use for children 10+
1. Never heat polymorph over 200 ºC as this will damage the polymer.
2. Leave the pellets to melt in the water until they turn transparent.
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
Color: White
Good dissolubility
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
Material: Polycaprolactone
1 Bag polymorph Thermoplastic
3. Do not . Contact if swallowed.
High crystallinity and low melting point
3. the pellets from the water and mould by hand (add color at this stage if required)
Size: 4mm
Material: Polycaprolactone
4. Product should be ok to use for children 10+
3. the pellets from the water and mould by hand (add color at this stage if required)
High crystallinity and low melting point
Color: White
1. Never heat polymorph over 200 ºC as this will damage the polymer.
Good dissolubility
Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.
Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.
5. Re-heat if further molding is required.
Size: 4mm
1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).
1 Bag polymorph Thermoplastic
2. Leave the pellets to melt in the water until they turn transparent.
5. Product may become .
4. Allow the polymorph to cool until solid.
3. Do not . Contact if swallowed.
2. Wait around 5 min after it cools down before you reheat and reshape it again.