Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Mach3 Software website.

Description:

suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,Aluminum material,Copper,

1.This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.

3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.

4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...

5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.

cnc engraving machine parameters:

Feature:

1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.

2,water cooling spindle works more stable and durable.

3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.

4, Software Compatability：Mach3/Emc2/Type3/ArtCAMParameter

How to use:

1.Assembling and locating the CNC machine on steady desk well.

2.Make sure that your computer has a 25pin parallel port output.

3. Place the contral box in a ventilated dry place where there is no dust,no moisture

4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.

5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.

6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

7.Installing a CNC control software and Drive such as the MACH 3 or EMC2on your computer.

8.Fllowing our manual or guideline to set uo the software.

9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.

10.You can enjoy making you dream with using our CNC machine now.

Description

1.This CNC 6040T machine is suitable for industry, Technology Research,

Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

2.It can work with various materials(metallic & non-metallic), such as: wood,

pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave

them into 3D/2D works etc.

3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals,

bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models,

instrument panels, wooden products, etc.

4.The mini CNC router Frame is movable. The machine can connect with computer

as other external device such as printer , scanner...

5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.

 

 

CNC engraving machine parameters:

X,Y,Z Working Area:600(Y)*390（X）*120(Z)mm
Outside dimension:865*680*570mm（L*W*H）
Table size:770（Y）*490（X）mm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤100mm
Drive unit:
X axis:1605 Ball Screws
Y axis:1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit:
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor
（tips：1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V).
3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension:65*158mm
Material:304 stainless steel，Copper coil，Pressure cast aluminum pipe water jacket
VOLTS，current，power:AC220 /50Hz，5A,1.5KW VFD
Spindle speed:24000 rpm
Max working frequency:400Hz
Principal axis collet:ER11collet，Standard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions:G code / TAB files / nc file / NCC files
Communication interface:through parallel connection with computer
Software environment:windows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)

 

1，Water cooled spindle motor can work longer time than air cooled motor.

2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor.

 

Friendly reminder: The engraver will come with software（Free Version

If you followed the installation tips offered by us, it works like full version.）
installation tips：
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.

Control box parameters:

Control box parameters:
Operating Voltage：AC220V
Control unit：Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection：USB port
Command code：G code
Acceptable software：the soft we provide
Protection：Emergency stop button

Feature:

1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced
the processing abilty of the machine and can be used to

process aluminum alloy and hard wood.

2,water cooling spindle works more stable and durable.

3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.

4, Software Compatability：the soft we provide/Type3/ArtCAMParameter

 

How to USE

1.Assembling and locating the CNC machine on steady desk well.

2.Make sure that your computer has a 25pin USB port output.

3. Place the contral box in a ventilated dry place where there is no dust,no moisture

4.Connecting the control box with the CNC machine and you computer and make sure

the plug will not come off.

5.Correctly connect the machine with the controller. Don't suspended the cable which

connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.

6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered

completely in the water, then turned on the electric current to
check whether the water-cooling system working well.

7.Installing a CNC control software and Drive such as the soft we provide on your computer.

8.Fllowing our manual or guideline to set uo the software.

9. Before turn on the machine, please check all the cable and water- cooling system to

make sure they are working fine.

10.You can enjoy making you dream with using our CNC machine now.

 

elektronisches USB Handrad CNC fräse fräsmaschine

 

 

Description:

Industrial CNC engraving machine controller was designed for the soft we provide system

Do not need to install any software and driver, Spring can be stretched to 3 meters

Waterproof design, very durable, anti-dirt, oil spray

Power by USB port

Dimensions: 22 x 8 x 3cm

Please note: this item works with the soft we provide ONLY

The usb self-check light, you can type the " scroll" on the keyboard to activate it.

Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A-

Feed rate control: F+, F-

Jog rate: J+, J-

Spindle speed: speed up, slow down

Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point

Package Include

1 * Remote controller

1 * Cable