Bluetooth Stereo Speakers ONKYO 2x60W (Play time 14h-70h)
A compact full-range speaker system that can be mounted on the wall or on a tripod stand.
Super preserved speakers in perfect working condition with built-in Bluetooth, two rechargeable 12.6V Samsung Lithium-ion battery packs and two 60W amplifiers.
Play time: normal power - 70h (30ma/h), max. power - 14h (150ma/h)
System specifications:
2x ONKYO D20 Speaker:
Method: 1-Way, Bass Reflex System, Magnetic Protection Design (EIAJ)
Units used for all bands : 12 cm cone type
Playback frequency band: 90 Hz to 20000 Hz
Max Input: 80W (EIAJ)
Impedance: 8Ω
Output sound pressure level: 90dB/W/m
External dimensions: Width 250, Height 160, Depth 166.5 mm
Weight: 2x2Kg (total 4Kg)
2x Amplifier:
60W Mono Amplifier
Impedance: 8Ω
3S 40A PCB BMS With Balance
Samsung Lithium-ion battery pack 3x 3.8V 2100mAh (full carged: 12.6V 2100mAh)
2x Bluetooth:
TWS E6S Bluetooth 5.0 connection
Communication distance: 15 meters
1x Sanyo 18650 3.6V 2400mAh
5V 1A Li-ion Battery Charger Module
1x 12.6V 1A Lithium Battery Charger with LED charging indicator
Charging voltage: 12.6V-13.6V 500mAh-2100mAh (max.)
1x Metal speaker holder with carrying belt
1x Fixing belt
Sold separately:
Tripod Stand AS-M50
Wall Mounting Bracket TK-M50
Arm Stand GR-M50
Operation instructions:
Turn on:
1. Turn round knob to 25% from left side (not to be too loud when bluetooth connects)
2. Turn Power on/off switch from 0 to 1
3. Press & hold black BT button for 3 seconds, until voice alert "Power on"
4. Find Bluetooth device "TWS" on your smart device and connect (there is an option to rename TWS to the name of your choice). Voice alert "Bluetooth connected"
5. For second speaker repeat numbers 1, 2 and 3. Bluetooth will automatically connect to first speaker in stereo sound mode.
Turn off:
1. Turn round knob to 25% from left side
2. Press & hold black button for 3 seconds, until voice alert "Power off" (if both speakers were connected, second speaker's Bluetooth shall turn off too)
3. Turn Power on/off switch from 1 to 0.
Each speaker can be connected separately to two different devices.
Bluetooth operation instructions:
Power On: Press and hold (L) (left speaker) or (R) (right speaker) button for about 3 seconds to power on. “Power On” message through the speaker. Both speakers connect automatically.
Power Off: Press and hold (L) or (R) button for about 3 seconds to power off. “Power Off” message through the speaker.
Music Play/Pause：Short press (L) or (R) button to play or pause music.
Music Next/Previous: Double press (L) button to go to the next song. Double press the (R) button to go to the previous song.
Answer Call：During incoming call, once press (L) or (R) button to answer a call.
End Call: During a call, once press (L) or (R) button to end a call.
Reject Call：During an incoming call, double press (L) or (R) button to reject a call.
Automatic Connection：After the initial set up and connection, the speakers will automatically connect to your device next time you turn them on.
Reset and connect to other Bluetooth device: Under power off status, press and hold the button for about 10 seconds, alternating red and blue lights flashing, then speaker(s) can be connected to other device.