You Will receive two factory sealed bags of 50 each. What you see in the pictures are the exact items you will receive.
This tile leveling system tool kit is designed to find the horizontal level of tiles to ensure the flatness between tiles and avoid movement of tiles while mortaring. It will not only improve efficiency your floor tiling process but also provide a tidy and flawless tile surface
Main Features:
- Functions of these tile leveling system kits:
-Make sure the tiles are on the same horizontal position and avoid tiles unevenness.
-The system ensures flatness between tiles avoiding movements during the mortar setting
-Prevent tiles from moving while tiling the floor increasing the tile paving efficiency.
-Make the same cement gap between tiles giving the floor or wall tidy, even and flawless look.
- A must own time-saving, energy-saving-money-saving tool kits.
- Reduce tile polishing work
- Quality 304 stainless steel needle: wear-resistant, longer life span. Not made of cheap metal
- Reusable and recycling tile leveller kits: you could recycle the kits and reuse them
- Great aesthetic look on the floor: Needle is 1.3mm Thick For Tile Gap between 5-6mm
- Fit For 5-17mm Thick Tiles
- The tool kit includes: 1x wrench, 1x T Shape stainless steel needle and 1x black adjusting cover
- Please leave 2mm mortar gap between the first tiles paved and floor so that you could insert the leveler needle in.
- Please make sure take off the tile leveler after 4-6 hours of tiling.
Using Tips:1.Take out the leveler and adjust the distance of the T-needle
2.Insert the T-needle along the crack, then rotate it 90 degrees
3.clamp the T-needle at the bottom of the two tiles and tighten the adjustment cover clockwise with your hand or a special wrench
4.The two tiles are in the same level
5.Before the cement or tile adhesive is completely dry (4-6hours after paving the tiles), loosen the adjustment cover in the opposite direction and then rotate the T-needle 90 degrees to remove it.
Material: PP wrench, adjusting cover and PP needle cover, stainless steel T shape needle
T shape stainless steel needle size: (L) 18mm x (W)10mm, Needle: 1.3mm Thick
Black adjusting cover: 36mmDiameter, 21mm High
Orange Wrench: L 15cm x W3cm