SKR Mini E3 V2.0 Control Board 32-Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board

  • ⭐【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.
  • ⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).
  • ⭐【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • ⭐【MOSFET】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.
  • ⭐【After-sales Support】If you encounter any problems, please write us via as soon as possible. We have professional technical after-sales personnel to solve your problems; Thank you for your support.

Product Description

Better Protection and Safety Design

Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink.

Two CNC Fan Interface

Change an original frequent fan to a CNC fan, user-friendly.

Power Chip

Use MP1584EN power chip, support 12-24V power input, maximum output current up to 2.5A.

Add 5V Power Supply

5V power supply with BLTouch, TFT and RGB interfaces is optional.

Onboard Sensorless Homing Function

You can use this function by plugging in the jumpcap, easy and convenient.

Connect with Power-off Resume

Connect with BLTouch Automatic Leveling

Connect with Automatic Shutdown

Connect with Smart Filament Sensor

Motherboard Parameters:

Layer: 4 layers
Power input: DC 12 / 24V
Appearance size: 100.75 * 70.25mm
Motor driver: UART mode of onboard TMC2209
Temperature sensor interface: TH0, THB, 2 channels 100K NTC (thermal resistance)
Motor drive interface: XM, YM, ZAM, ZBM, EM
Logic voltage: 3.3V
Support file format: G-code
Main Control Chip: ARM Cortex-M3 STM32F103RET6
PC communication interface: Mini-USB-B type, easy to plug and unplug, communication baud rate 115200
Display: 2.4 inch TFT, 3.5 inch TFT, Ender3 original LCD12864 screen, etc
Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware

Item Specification

  • Item model number ZZB000378+ZZB000534
    Style SKR Mini E3 V2.0+TFT35 E3 3.0
    Batteries required No
    Item Weight 9.1 ounces
    Package Dimensions 6.22 x 4.65 x 2.76 inches
  • Product Dimensions: 4.65 inches x 6.22 inches x 2.76 inches. Weight: 9.1 oz
  • Fast shipping is very important for us.

    Our standard shipping service is FREE.

    Your order will be shipped within 1-3 business days upon full payment received.

    Most items are delivered within 3-5 business days, however, please allow 3-10 business days.

    We are shipping only to USA.

    We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.

    We are not responsible for undeliverable addresses.
  • We offer a 30 day return policy from checkout winning date.

    Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization.

    Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.

    Return shipping fees are not refundable.

    We reserve the right to decline any returns if the above guidelines are not followed.
  • All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.

    If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.