Before using Primer/Rust stop the surface should be properly prepared. If there is a substantial layer of corrosion damage, it should be removed mechanically. If there is some flaking paint on the edges of a damaged area, remove it too. The surface should be dry, clean and grease-free. Shake well the bottle. Apply it and leave to dry. When the surface is no longer sticky, paint may be applied. The drying time is 1-2 hours.You always can use heating tool to speed up Your drying process.
Shake well before use. Make sure that the damaged areas are dry, clean and grease-free. Where there is some flaking paint on the edges of a damaged area, remove it, too. Apply the paint in layers, let it dry for 15 minutes. Apply the next layer only after the previous layer has dried. The number of layers required depends on the paint coverage area. You always can use heating tool to speed up Your drying process.
Before using the clear coat make sure NOT to shake the touch up pen because air bubbles formed in it will prevent even distribution of the clear coat on the surface. After the application of the clear coat, the surface will be shiny and resistant to environmental impacts.You always can use heating tool to speed up Your drying process.
We are "4Brush" a European company with over 25 years of experience in the vehicle painting sector.
We produce and mix the highest quality paint and sell it worldwide.
We are professionals in our field, so don't hesitate to contact us! We will find a solution for your problem!
We will ship your order in 1 to 3 business days worldwide.
You should receive your package usually within 5 to 14 days.
On rare occasions, it could take a bit longer; please contact us, and we will check it for you.
Shop with Confidence: Guaranteed Secure Payments.
We hope you will love your purchase. However, if you need to return it, we have a 60-day return policy.
The returned item must be unused and unopened.
If the item came broken or spilled, please contact us, and we will find the BEST SOLUTION for You!
Have any questions? Write us via: eBay Message