For VBR (SMPTE 2022-3), only SPTS reception is possible.
For CBR (SMPTE 2022-2) - SPTS and MPTS.
The module can be used to build various digital broadcasting equipment to enable it to receive transport streams over an Ethernet network, and also to create various gateways (IP-to-ASI, etc.).
The transport stream from the module can be transmitted to the DVB-S / -S2 / -C / -T - / -T2 modulators, DVB TS-to-ASI converters and others.
Control, monitoring and adjustment of the module parameters is carried out using a PC via the Ethernet interface using a specialized program. The module's internal software is updated via Ethernet.
To create multi-channel devices, you can connect to the control module, while maintaining the ability to use all the functions of the IP receiver, including updating the internal software. This mode ("Slave") is activated using a jumper designed for this purpose. All settings of the IP receiver in the "Slave" mode are performed through the control module.
In the "Master" mode, the IP receiver can control one module connected to it (for example, a modulator).
The presence of "Master"/ "Slave" control modes significantly increases flexibility when creating equipment from modules in various combinations.
UMT IPTV Input to TS (transport stream) Module Board
can be controlled, monitored and adjusted from PC via TCP/IP protocol.
UMT IP Control Module Board (6 or 16 ports) is required for management and monitoring of the Modulator Board.
(can be purchased separately, please see other lots in our eBay store)
Main technical characteristics:
- Input interface: 10/100 Base-T, Full/Half Duplex
- Negotiation with the connected equipment: Auto/manually
- Input Connector Type: RJ-45
- Maximum input bitrate (brutto): 94 Mbit/s
-
Maximum input bitrate
(netto): 90 Mbit/s
- Supported input protocols: UDP/RTP, Unicast/Multicast
- Number of DVB-transport packets in one Ethernet frame: 1…7
- SMPTE encapsulation standards: 2022-2, 2022-3
- Output interface: Synchronous parallel interface
- Maximum output bitrate (brutto): 94 Mbit/s
-
Maximum output bitrate
(netto): 90 Mbit/s
- Management Interfaces: Ethernet, RS-232
- Supply voltage: 8…18 V
- Consumed power, no more than: 3 W
- Board dimensions: 111 х 81 mm
Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement,
know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.
UMT LLC is a young company which work at the digital telecommunication and TV broadcasting market as a system integrator, developer and manufacturer of the equipment for:
- DVB communications
- microwave TV broadcasting systems like MMDS, MVDS and LMDS
- radio relay systems of C, Ku K and Ka-bands with high level of channels capacity
We design and manufacture this device.
So if it is not in stock, handling time can be longer than a few days (usually up to one week).
Please do not hesitate to ask any questions you may have before buying or bidding.